mirrors/asuswrt-merlin.ng
1
0
Fork 0
mirror of https://github.com/gnuton/asuswrt-merlin.ng.git synced 2025-05-19 07:51:46 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
asuswrt-merlin.ng/release/src-rt-5.02axhnd.675x/shared/opensource/boardparms/bcm963xx/boardparms_47622.c
Eric Sauvageau d93b900ab0 Merge updated 5.02 675x SDK + RT-AX58U binary blobs
2021-10-29 21:51:43 -04:00

1478 lines
76 KiB
C
Raw Permalink Blame History

#include "bp_defs.h"
#include "boardparms.h"
#include "bcmSpiRes.h"
extern BpCmdElem moca6802InitSeq[];
#define BCM947622_PHY_BASE 0x8
static bp_elem_t g_bcm947622sv[] = {
{bp_cpBoardId, .u.cp = "947622SV"},
{bp_ulCompatChipId, .u.ul = 0x47622},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_EMMC},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_39_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_38_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE},
{bp_ulCrossbarPhyId, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE+1},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE+2},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_2_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_10_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_11_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_12_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_13_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_17_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_18_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_19_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_20_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_21_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_22_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_23_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_24_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_25_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_26_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_27_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_28_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_30_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_31_AL},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_SERIAL_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},
{bp_usNetLed1, .u.us = BP_SERIAL_GPIO_1_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_SERIAL_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_5_AH},
{bp_usUartSdout, .u.us = BP_GPIO_6_AH},
{bp_usUartCts, .u.us = BP_GPIO_3_AH},
{bp_usUartRts, .u.us = BP_GPIO_4_AH},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_SGMII},
{bp_usPortNum, .u.us = 1},
{bp_usNetLed0, .u.us = BP_SERIAL_GPIO_4_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_10|BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_2500},
{bp_usNetLed1, .u.us = BP_SERIAL_GPIO_5_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G|BP_NET_LED_SPEED_100},
{bp_usNetLed2, .u.us = BP_SERIAL_GPIO_6_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_2500},
{bp_usNetLed3, .u.us = BP_SERIAL_GPIO_7_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfMgmtType, .u.us = BP_INTF_MGMT_TYPE_I2C},
{bp_usIntfMgmtBusNum, .u.us = 0},
{bp_usExtIntrOpticalModulePresence, .u.us = BP_EXT_INTR_2 | BP_EXT_INTR_TYPE_IRQ_BOTH_EDGE | BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
{bp_usGpioSfpModDetect, .u.us = BP_GPIO_9_AL},
{bp_usSfpSigDetect, .u.us = BP_GPIO_26_AL },
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_I2C},
{bp_usPortNum, .u.us = 0},
{bp_usGpioI2cSda, .u.us = BP_GPIO_16_AH},
{bp_usGpioI2cScl, .u.us = BP_GPIO_17_AH},
{bp_usIntfEnd},
/* Serial LED must be AH in the new LED controllre. But the
board design use AL so won't expect them to work... */
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_usSerialLedShiftOrder, .u.us = BP_SERIAL_LED_SHIFT_MSB_FIRST},
{bp_usI2sSclk, .u.us = BP_GPIO_11_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_12_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_13_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_14_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_15_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_22_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_23_AH},
{bp_usPcmClk, .u.us = BP_GPIO_24_AH},
{bp_usPcmFs, .u.us = BP_GPIO_25_AH},
{bp_usGpioBtWake, .u.us = BP_GPIO_27_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_7_AH},
{bp_usSpiSlaveSelectNum, .u.us = 0},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_75_AL},
{bp_usSpiSlaveSelectNum, .u.us = 1},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_76_AL},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_10_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_1067_14_14_14 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm947622sv_serdes[] = {
{bp_cpBoardId, .u.cp = "947622SV_SERDES"}, // deprecated use 947622sv instead
{bp_elemTemplate, .u.bp_elemp = g_bcm947622sv},
{bp_last}
};
static bp_elem_t g_bcm947622rfdvt[] = {
{bp_cpBoardId, .u.cp = "947622RFDVT"},
{bp_ulCompatChipId, .u.ul = 0x47622},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_39_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_38_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_10},
{bp_usNetLed1, .u.us = BP_GPIO_1_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},
{bp_usNetLed2, .u.us = BP_GPIO_2_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xMII},
{bp_usPortNum, .u.us = 1},
{bp_usNetLed0, .u.us = BP_GPIO_4_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_10},
{bp_usNetLed1, .u.us = BP_GPIO_5_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},
{bp_usNetLed2, .u.us = BP_GPIO_6_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_7_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usSpiSlaveSelectNum, .u.us = 0},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_75_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_TYPE_DDR4 | BP_DDR_SPEED_1067_15_15_15 | BP_DDR_TOTAL_SIZE_2048MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm947622rfdvt2[] = {
{bp_cpBoardId, .u.cp = "947622RFDVT2"},
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_SGMII},
{bp_usPortNum, .u.us = 1},
{bp_usNetLed0, .u.us = BP_GPIO_4_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_10},
{bp_usNetLed1, .u.us = BP_GPIO_5_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},
{bp_usNetLed2, .u.us = BP_GPIO_6_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_7_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfMgmtType, .u.us = BP_INTF_MGMT_TYPE_I2C},
{bp_usIntfMgmtBusNum, .u.us = 0},
{bp_usExtIntrOpticalModulePresence, .u.us = BP_EXT_INTR_2 | BP_EXT_INTR_TYPE_IRQ_BOTH_EDGE | BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
{bp_usGpioSfpModDetect, .u.us = BP_GPIO_9_AL},
{bp_usSfpSigDetect, .u.us = BP_GPIO_26_AL},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_I2C},
{bp_usPortNum, .u.us = 0},
{bp_usGpioI2cSda, .u.us = BP_GPIO_16_AH},
{bp_usGpioI2cScl, .u.us = BP_GPIO_17_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_elemTemplate, .u.bp_elemp = g_bcm947622rfdvt},
{bp_last}
};
static bp_elem_t g_bcm947622eap[] = {
{bp_cpBoardId, .u.cp = "947622EAP"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | EXTSW_CONNECTED},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0x0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId3, .u.ul = BP_PHY_ID_3 | CONNECTED_TO_EXTERN_SW},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_TYPE_DDR4 | BP_DDR_SPEED_1067_15_15_15 | BP_DDR_TOTAL_SIZE_2048MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usSpiSlaveSelectNum, .u.us = 0},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_75_AL},
{bp_usSpiSlaveSelectNum, .u.us = 1},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_76_AL},
/* reset-gpio for th external switch. */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_last}
};
static bp_elem_t g_bcm947622eap2[] = {
{bp_cpBoardId, .u.cp = "947622EAP2"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ucPhyAddress, .u.uc = 0x1},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE},
{bp_ulCrossbarPhyId, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE+2},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1 | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usGpioPhyReset, .u.us = BP_GPIO_33_AL},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_TYPE_DDR4 | BP_DDR_SPEED_1067_15_15_15 | BP_DDR_TOTAL_SIZE_2048MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usSpiSlaveSelectNum, .u.us = 0},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_75_AL},
{bp_usSpiSlaveSelectNum, .u.us = 1},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_76_AL},
{bp_last}
};
static bp_elem_t g_bcm947622eaps[] = {
{bp_cpBoardId, .u.cp = "947622EAPS"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE},
{bp_ulCrossbarPhyId, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = BP_CROSSBAR_PORT_BASE+2},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usGpioPhyReset, .u.us = BP_GPIO_33_AL},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_TYPE_DDR4 | BP_DDR_SPEED_1067_15_15_15 | BP_DDR_TOTAL_SIZE_2048MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usSpiSlaveSelectNum, .u.us = 0},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_75_AL},
{bp_usSpiSlaveSelectNum, .u.us = 1},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_76_AL},
{bp_last}
};
static bp_elem_t g_bcm947622ref1[] = {
{bp_cpBoardId, .u.cp = "947622REF1"},
{bp_ulCompatChipId, .u.ul = 0x47622},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGpioLedWanLink, .u.us = BP_GPIO_5_AL}, /* nobody use this led but defined in board*/
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_1_AL}, /* WPS_LED */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_7_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_36_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = RGMII_DIRECT_3P3V | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0x0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId3, .u.ul = BP_PHY_ID_3 | CONNECTED_TO_EXTERN_SW},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AH},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_I2C},
{bp_usPortNum, .u.us = 0},
{bp_usGpioI2cSda, .u.us = BP_GPIO_16_AH},
{bp_usGpioI2cScl, .u.us = BP_GPIO_17_AH},
{bp_usIntfEnd},
/* may also bue used as LED channels for RGB LED test */
{bp_usI2sSclk, .u.us = BP_GPIO_11_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_12_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_13_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_14_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_15_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_22_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_23_AH},
{bp_usPcmClk, .u.us = BP_GPIO_24_AH},
{bp_usPcmFs, .u.us = BP_GPIO_25_AH},
{bp_usMiiMdc, .u.us = BP_GPIO_68_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_69_AH},
{bp_usSpiSlaveSelectNum, .u.us = 0},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_75_AL},
{bp_usSpiSlaveSelectNum, .u.us = 1},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_76_AL},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_10_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_1067_14_14_14 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm947622ref1_sg[] = {
{bp_cpBoardId, .u.cp = "947622REF1_SG"},
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | EXTSW_CONNECTED},
{bp_elemTemplate, .u.bp_elemp = g_bcm947622ref1},
{bp_last}
};
static bp_elem_t g_bcm947622ref1_p250[] = {
{bp_cpBoardId, .u.cp = "947622REF1P250"},
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_elemTemplate, .u.bp_elemp = g_bcm947622ref1},
{bp_last}
};
static bp_elem_t g_bcm947622ref1_sg_p250[] = {
{bp_cpBoardId, .u.cp = "47622REF1SGP250"},
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_elemTemplate, .u.bp_elemp = g_bcm947622ref1_sg},
{bp_last}
};
static bp_elem_t g_bcm96755ref1[] = {
{bp_cpBoardId, .u.cp = "96755REF1"},
{bp_ulCompatChipId, .u.ul = 0x47622}, /* remove this line when chip id is otp'ed to 0x6755 */
{bp_ulCompatChipId, .u.ul = 0x6755},
/* use slower ddr clock in 6755 chip for now. May bump up to 1067MHz if test pass */
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_elemTemplate, .u.bp_elemp = g_bcm947622ref1},
{bp_last}
};
static bp_elem_t g_bcm96755ref1_sg[] = {
{bp_cpBoardId, .u.cp = "96755REF1_SG"},
{bp_ulCompatChipId, .u.ul = 0x47622}, /* remove this line when chip id is otp'ed to 0x6755 */
{bp_ulCompatChipId, .u.ul = 0x6755},
/* use slower ddr clock in 6755 chip for now. May bump up to 1067MHz if test pass */
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_elemTemplate, .u.bp_elemp = g_bcm947622ref1_sg},
{bp_last}
};
static bp_elem_t g_bcm96755ref1_p200[] = {
{bp_cpBoardId, .u.cp = "96755REF1P200"},
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_elemTemplate, .u.bp_elemp = g_bcm96755ref1},
{bp_last}
};
static bp_elem_t g_bcm96755ref1_sg_p200[] = {
{bp_cpBoardId, .u.cp = "96755REF1SGP200"},
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_0_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_3_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_elemTemplate, .u.bp_elemp = g_bcm96755ref1_sg},
{bp_last}
};
static bp_elem_t g_bcm96755tbrhx[] = {
{bp_cpBoardId, .u.cp = "96755TBRHX"},
{bp_ulCompatChipId, .u.ul = 0x47622}, /* remove this line when chip id is otp'ed to 0x6755 */
{bp_ulCompatChipId, .u.ul = 0x6755},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_10_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulPhyId1, .u.ul = 0x1f | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed0, .u.us = BP_GPIO_25_AL},
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_10|BP_NET_LED_SPEED_1G},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_5_AH},
{bp_usUartSdout, .u.us = BP_GPIO_6_AH},
{bp_usUartCts, .u.us = BP_GPIO_3_AH},
{bp_usUartRts, .u.us = BP_GPIO_4_AH},
{bp_usIntfEnd},
{bp_usI2sSclk, .u.us = BP_GPIO_11_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_12_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_13_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_14_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_15_AH},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_I2C},
{bp_usPortNum, .u.us = 0},
{bp_usGpioI2cSda, .u.us = BP_GPIO_16_AH},
{bp_usGpioI2cScl, .u.us = BP_GPIO_17_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_7_AL},
{bp_usGpioBtWake, .u.us = BP_GPIO_33_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_29_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_1067_14_14_14 | BP_DDR_TOTAL_SIZE_512MB | BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm96755ref2[] = {
{bp_cpBoardId, .u.cp = "96755REF2"},
{bp_ulCompatChipId, .u.ul = 0x6755},
{bp_ulCompatChipId, .u.ul = 0x47622},
/* Serial LED must be AH in the new LED controllre. But the
board design use AL so won't expect them to work... */
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_HS_SPI},
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_38_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_39_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x1},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_I2C},
{bp_usPortNum, .u.us = 0},
{bp_usGpioI2cSda, .u.us = BP_GPIO_16_AH},
{bp_usGpioI2cScl, .u.us = BP_GPIO_17_AH},
{bp_usIntfEnd},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_10_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_11_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_13_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_14_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_15_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_16_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_17_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_18_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_19_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_20_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_24_AH},
/* may also bue used as LED channels for RGB LED test */
{bp_usI2sSclk, .u.us = BP_GPIO_11_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_12_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_13_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_14_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_15_AH},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm96755map_ax6600[] = {
{bp_cpBoardId, .u.cp = "MAP-AX6600"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
/* 53134 */
{bp_ulPhyId0, .u.ul = RGMII_DIRECT_3P3V | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
/* 54991 (phy addr 0x1f) */
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | PHY_EXTERNAL},
{bp_ulPhyId1, .u.ul = 0x1f | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
/* 53134 */
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x07},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_5_AH},
{bp_usUartSdout, .u.us = BP_GPIO_6_AH},
{bp_usUartCts, .u.us = BP_GPIO_3_AH},
{bp_usUartRts, .u.us = BP_GPIO_4_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
#if 0
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
#endif
/* reset-gpio for th external switch. */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm96755map_ax66001[] = {
{bp_cpBoardId, .u.cp = "MAP-AX66001"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
/* 53134 */
{bp_ulPhyId0, .u.ul = RGMII_DIRECT_3P3V | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
/* 54991 (phy addr 0x1f) */
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | PHY_EXTERNAL},
// {bp_ulPhyId1, .u.ul = 0x1f | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPhyId1, .u.ul = 0x7 | MAC_IF_HSGMII},
/* 53134 */
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x07},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_5_AH},
{bp_usUartSdout, .u.us = BP_GPIO_6_AH},
{bp_usUartCts, .u.us = BP_GPIO_3_AH},
{bp_usUartRts, .u.us = BP_GPIO_4_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
#if 0
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
#endif
/* reset-gpio for th external switch. */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_xd4[] = {
{bp_cpBoardId, .u.cp = "XD4"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usButtonIdx, .u.us = 2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
{bp_usButtonIdx, .u.us = 3},
{bp_usGpio_Intr, .u.us = BP_GPIO_21_AL},
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AH | BP_LED_USE_GPIO}, /* WLAN_2G_ACT */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AH | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_3P3V | PHY_EXTERNAL},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_22_AL},
/* reset-gpio for 50212E */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_ct_xd4[] = {
{bp_cpBoardId, .u.cp = "CTXD4"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usButtonIdx, .u.us = 2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
{bp_usButtonIdx, .u.us = 3},
{bp_usGpio_Intr, .u.us = BP_GPIO_21_AL},
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AH | BP_LED_USE_GPIO}, /* WLAN_2G_ACT */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AH | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_3P3V | PHY_EXTERNAL},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_22_AL},
/* reset-gpio for 50212E */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_rtax55[] = {
{bp_cpBoardId, .u.cp = "RT-AX55"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_5_AL}, // Power LED
{bp_usGpioLedWanAct, .u.us = BP_GPIO_7_AL}, // WAN LED
#if 0
{bp_usGpioLedWanErr, .u.us = BP_GPIO_11_AL},
#endif
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_14_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_15_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedReserved, .u.us = BP_GPIO_11_AL}, // WAN RED LED
{bp_usGpioLedReserved, .u.us = BP_GPIO_12_AL}, // LAN LED
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = RGMII_DIRECT_3P3V},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY/* | PORT_FLAG_RX_INTERNAL_DELAY*/},
/* reset-gpio for RTL8367S */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_256MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_xd4_slave[] = {
{bp_cpBoardId, .u.cp = "XD4SLAVE"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usButtonIdx, .u.us = 2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
{bp_usButtonIdx, .u.us = 3},
{bp_usGpio_Intr, .u.us = BP_GPIO_21_AL},
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AH | BP_LED_USE_GPIO}, /* WLAN_2G_ACT */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AH | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x1},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_22_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_xd4_256m[] = {
{bp_cpBoardId, .u.cp = "XD4_256M"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usButtonIdx, .u.us = 2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
{bp_usButtonIdx, .u.us = 3},
{bp_usGpio_Intr, .u.us = BP_GPIO_21_AL},
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AH | BP_LED_USE_GPIO}, /* WLAN_2G_ACT */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AH | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_3P3V | PHY_EXTERNAL},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_22_AL},
/* reset-gpio for 50212E */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_256MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_xd4_slave_256m[] = {
{bp_cpBoardId, .u.cp = "XD4SLAVE_256M"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usButtonIdx, .u.us = 2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
{bp_usButtonIdx, .u.us = 3},
{bp_usGpio_Intr, .u.us = BP_GPIO_21_AL},
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AH | BP_LED_USE_GPIO}, /* WLAN_2G_ACT */
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AH | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x1},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_22_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_256MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_rt_ax56u[] = {
{bp_cpBoardId, .u.cp = "RT-AX56U"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_7_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0x0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId3, .u.ul = BP_PHY_ID_3 | CONNECTED_TO_EXTERN_SW},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
{bp_usNetLed3, .u.us = BP_GPIO_28_AL},
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL}, /* Power LED */
{bp_usGpioLedReserved, .u.us = BP_GPIO_27_AL},
/* reset-gpio for the external switch. */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_rp_ax56[] = {
{bp_cpBoardId, .u.cp = "RP-AX56"},
{bp_ulCompatChipId, .u.ul = 0x6755},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL}, /* reset btn */
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_4_AL}, /* wps btn */
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usCfeResetToDefaultBtnIdx, .u.us = 0},
#endif
//{bp_usGpioLedWL1Act, .u.us = BP_GPIO_11_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
//{bp_usGpioLedWL0Act, .u.us = BP_GPIO_15_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x1},
{bp_ulPhyId0, .u.ul = (BCM947622_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* WAN_LNKACT */
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
//{bp_usNetLed3, .u.us = BP_GPIO_12_AL},
//{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usGpioLedReserved, .u.us = BP_GPIO_5_AL}, /* red LED */
{bp_usGpioLedReserved, .u.us = BP_GPIO_7_AL}, /* green LED */
{bp_usGpioLedReserved, .u.us = BP_GPIO_11_AL}, /* blue LED */
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL}, /* yellow LED */
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL}, /* purple led */
{bp_usGpioLedReserved, .u.us = BP_GPIO_12_AH}, /* white led */
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_256MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm96755map_rt_axe95q[] = {
{bp_cpBoardId, .u.cp = "RTAXE95Q"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
/* 53134 */
{bp_ulPhyId0, .u.ul = RGMII_DIRECT_3P3V | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
/* 54991 (phy addr 0x7) */
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | PHY_EXTERNAL},
{bp_ulPhyId1, .u.ul = 0x7 | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
/* 53134 */
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x07},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_5_AH},
{bp_usUartSdout, .u.us = BP_GPIO_6_AH},
{bp_usUartCts, .u.us = BP_GPIO_3_AH},
{bp_usUartRts, .u.us = BP_GPIO_4_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
#if 0
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
#endif
/* reset-gpio for th external switch. */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm96755map_rt_ax95q_2[] = {
{bp_cpBoardId, .u.cp = "RTAX95Q_2"},
{bp_ulCompatChipId, .u.ul = 0x6755},
/* Button */
{bp_usButtonIdx, .u.us = 0},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_9_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
#endif
{bp_usButtonIdx, .u.us = 1},
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
{bp_usGpio_Intr, .u.us = BP_GPIO_8_AL},
#if defined(_CFE_)
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
{bp_usGphyBaseAddress, .u.us = BCM947622_PHY_BASE},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Cross bar switch
{bp_ulPortMap, .u.ul = 0x3},
/* 53134 */
{bp_ulPhyId0, .u.ul = RGMII_DIRECT_3P3V | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
/* 54991 (phy addr 0x7) */
{bp_ulPhyId1, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES | PHY_EXTERNAL},
{bp_ulPhyId1, .u.ul = 0x7 | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
/* 53134 */
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_ucPhyAddress, .u.uc = 0},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MDIO},
{bp_ulPortMap, .u.ul = 0x07},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_0 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId1, .u.ul = BP_PHY_ID_1 | CONNECTED_TO_EXTERN_SW},
{bp_ulPhyId2, .u.ul = BP_PHY_ID_2 | CONNECTED_TO_EXTERN_SW},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_5_AH},
{bp_usUartSdout, .u.us = BP_GPIO_6_AH},
{bp_usUartCts, .u.us = BP_GPIO_3_AH},
{bp_usUartRts, .u.us = BP_GPIO_4_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_80_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_79_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_82_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_81_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_33_AL},
#if 0
{bp_usGpioLedWL1Act, .u.us = BP_GPIO_26_AL | BP_LED_USE_GPIO}, /* WLAN_5G_ACT */
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_39_AL | BP_LED_USE_GPIO}, /* WLAN_2G_ACT, must use BP_LED_USE_GPIO */
#endif
/* reset-gpio for th external switch. */
{bp_usGpioInitState, .u.us = BP_GPIO_10_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
bp_elem_t * g_BoardParms[] = {g_bcm947622sv, g_bcm947622rfdvt, g_bcm947622rfdvt2, g_bcm947622ref1, g_bcm96755ref1, g_bcm947622eap, g_bcm947622eap2, g_bcm947622eaps, g_bcm947622sv_serdes, g_bcm947622ref1_sg, g_bcm96755ref1_sg, g_bcm96755tbrhx, \
g_bcm947622ref1_p250, g_bcm947622ref1_sg_p250, g_bcm96755ref1_p200, g_bcm96755ref1_sg_p200, g_bcm96755ref2,
g_bcm96755map_ax6600,
g_rt_ax56u,
g_xd4, g_xd4_slave, g_xd4_256m, g_xd4_slave_256m,
g_rtax55,
g_rp_ax56, g_bcm96755map_ax66001, g_ct_xd4, g_bcm96755map_rt_axe95q, g_bcm96755map_rt_ax95q_2,
0};
Reference in a new issue View git blame Copy permalink