mirrors/asuswrt-merlin.ng
1
0
Fork 0
mirror of https://github.com/gnuton/asuswrt-merlin.ng.git synced 2025-05-19 07:51:46 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
asuswrt-merlin.ng/release/src-rt-5.02axhnd.675x/shared/opensource/boardparms/bcm963xx/boardparms_4908.c
Eric Sauvageau e1fd36ba6f SDK-6750: harmonize with ax.384 branch
2020-08-30 13:29:03 -04:00

1013 lines
60 KiB
C
Raw Permalink Blame History

#include "bp_defs.h"
#include "boardparms.h"
#include "bcmSpiRes.h"
extern BpCmdElem moca6802InitSeq[];
#define BCM94908_PHY_BASE 0x8
static bp_elem_t g_bcm94908sv[] = {
{bp_cpBoardId, .u.cp = "94908SV"},
{bp_ulCompatChipId, .u.ul = 0x4908},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_EMMC},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_I2S},
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm94908dvt[] = {
{bp_cpBoardId, .u.cp = "94908DVT"},
{bp_ulCompatChipId, .u.ul = 0x4908},
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_usButtonIdx, .u.us = 0},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_23_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_PRESS },
{bp_usButtonIdx, .u.us = 1},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_26_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
/* GPIO 14 to 17 shared with SPI slave inteface. Disable
* it to make SPI slave work. Uncomment these lines if
* SPI slave interface is not used*/
/*{bp_usGpioLedPwmReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedPwmReserved, .u.us = BP_GPIO_15_AL},*/
{bp_usGpioSfpDetect, .u.us = BP_GPIO_22_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_20_AH}, // placeholder for GPHY4 Link/Act
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_26_AH}, // placeholder spare serial led
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_27_AH}, // placeholder spare serial led
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_28_AH}, // placeholder spare serial led
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_24_AL},
{bp_usGpioLedWanData, .u.us = BP_SERIAL_GPIO_22_AH}, /* sw control led */
{bp_usGpioI2cSda, .u.us = BP_GPIO_18_AH },
{bp_usGpioI2cScl, .u.us = BP_GPIO_19_AH },
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 56},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulCrossbar, .u.ul = 11},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_GPIO_10_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_11_AL},
{bp_usLinkLed, .u.us = BP_GPIO_21_AL},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
//{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
/* Uncomment this line if SPI slave interface is not used */
/*{bp_usLinkLed, .u.us = BP_GPIO_16_AL},*/
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
/* Uncomment this line if SPI slave interface is not used */
/*{bp_usLinkLed, .u.us = BP_GPIO_17_AL},*/
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_18_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_6_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_7_AL},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
//{bp_ulCrossbar, .u.ul = 11},
//{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
//{bp_ulCrossbar, .u.ul = 9}, /* Removed due to Serdes GPIO enforcement */
//{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_19_AH},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_25_AH}, /* board schematic assign wrong channel26 which cause serial channel overflow */
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm94908dvt_sfpwan[] = {
{bp_cpBoardId, .u.cp = "94908DVT_SFPWAN"},
{bp_ulCompatChipId, .u.ul = 0x4908},
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_usButtonIdx, .u.us = 0},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_23_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_PRESS },
{bp_usButtonIdx, .u.us = 1},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_26_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
/* GPIO 14 to 17 shared with SPI slave inteface. Disable
* it to make SPI slave work. Uncomment these lines if
* SPI slave interface is not used*/
/*{bp_usGpioLedPwmReserved, .u.us = BP_GPIO_14_AL},
{bp_usGpioLedPwmReserved, .u.us = BP_GPIO_15_AL},*/
{bp_usGpioSfpDetect, .u.us = BP_GPIO_22_AL},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_20_AH}, // placeholder for GPHY4 Link/Act
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_26_AH}, // placeholder spare serial led
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_27_AH}, // placeholder spare serial led
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_28_AH}, // placeholder spare serial led
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_24_AL},
{bp_usGpioLedWanData, .u.us = BP_SERIAL_GPIO_22_AH}, /* sw control led */
{bp_usGpioI2cSda, .u.us = BP_GPIO_18_AH },
{bp_usGpioI2cScl, .u.us = BP_GPIO_19_AH },
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 56},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
//{bp_ulCrossbar, .u.ul = 9}, /* Removed due to Serdes GPIO enforcement */
//{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulCrossbar, .u.ul = 11},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_GPIO_10_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_11_AL},
{bp_usLinkLed, .u.us = BP_GPIO_21_AL},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
/* Uncomment this line if SPI slave interface is not used */
/*{bp_usLinkLed, .u.us = BP_GPIO_16_AL},*/
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
/* Uncomment this line if SPI slave interface is not used */
/*{bp_usLinkLed, .u.us = BP_GPIO_17_AL},*/
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_18_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_6_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_7_AL},
//{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
//{bp_ulCrossbar, .u.ul = 11},
//{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
//{bp_ulCrossbar, .u.ul = 9},
//{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_19_AH},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_25_AH}, /* board schematic assign wrong channel26 which cause serial channel overflow */
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm94908ref[] = {
{bp_cpBoardId, .u.cp = "94908REF"},
{bp_ulCompatChipId, .u.ul = 0x4908},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_EMMC},
{bp_usGpioUart2Cts, .u.us = BP_GPIO_10_AH},
{bp_usGpioUart2Rts, .u.us = BP_GPIO_11_AH},
{bp_usGpioUart2Sdin, .u.us = BP_GPIO_12_AH}, // uart2 is /dev/ttyH0
{bp_usGpioUart2Sdout, .u.us = BP_GPIO_13_AH}, // uart2 is /dev/ttyH0
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usGpioBtWake, .u.us = BP_GPIO_9_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_8_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_usButtonIdx, .u.us = 0},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_30_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{ bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usButtonIdx, .u.us = 1},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_29_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_30_AH}, // placeholder for GPHY4 Link/Act
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, // placeholder for GPHY4 Speed
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH}, // placeholder for GPHY4 Speed
{bp_usGpioLedSesWireless, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_usGpioLedWanData, .u.us = BP_SERIAL_GPIO_16_AH}, /* sw control led */
{bp_usGpioI2cSda, .u.us = BP_GPIO_18_AH },
{bp_usGpioI2cScl, .u.us = BP_GPIO_19_AH },
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 56},
{bp_usSpiSlaveSelectNum, .u.us = 2}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 23},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
//{bp_ulCrossbar, .u.ul = 9},
//{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_usGpioLedAggregateLnk, .u.us = BP_SERIAL_GPIO_24_AH},
{bp_usGpioLedAggregateAct, .u.us = BP_SERIAL_GPIO_25_AH},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_18_AH},
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_19_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 56},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = 23},
{bp_usSpiSlaveSelectNum, .u.us = 3},
{bp_usSpiSlaveSelectGpioNum, .u.us = 22},
{bp_last}
};
static bp_elem_t g_bcm94908ax86u[] = {
{bp_cpBoardId, .u.cp = "94908AX86U"},
{bp_ulCompatChipId, .u.ul = 0x4908},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_EMMC},
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_4_AL},
{bp_usGpioI2cSda, .u.us = BP_GPIO_22_AH}, /* i2c for sgmii optical module */
{bp_usGpioI2cScl, .u.us = BP_GPIO_23_AH},
{bp_usButtonIdx, .u.us = 0}, // Button: reset
#if defined(_CFE_)
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{bp_usGpio_Intr, .u.us = BP_GPIO_31_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_PRESS },
#else
#ifdef BRCM_BTN_ACTION
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 | BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
#else
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
#endif
{bp_usGpio_Intr, .u.us = BP_GPIO_31_AL},
#ifdef BRCM_BTN_ACTION
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button 1 Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S },
{bp_usCfeResetToDefaultBtnIdx, .u.us = 1 },
#endif
#endif
{bp_usButtonIdx, .u.us = 1}, // Button: wps
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{bp_usGpio_Intr, .u.us = BP_GPIO_2_AL},
#ifdef BRCM_BTN_ACTION
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
#if defined(_CFE_)
{bp_usExtIntrResetToDefault, .u.us = BP_EXT_INTR_2},
{bp_usGpio_Intr, .u.us = BP_GPIO_31_AL},
{bp_usExtIntrSesBtnWireless, .u.us = BP_EXT_INTR_3},
{bp_usGpio_Intr, .u.us = BP_GPIO_2_AL},
#endif
{bp_usButtonIdx, .u.us = 2}, // Button: WiFi toggle
{bp_usGpio_Intr, .u.us = BP_GPIO_15_AL},
{bp_usGpio_Intr, .u.us = BP_GPIO_14_AL}, // IPA=0, EPA=1
{bp_usGpio_Intr, .u.us = BP_GPIO_29_AL}, // BCM54991=0, RTL8226=1
{bp_usGpio_Intr, .u.us = BP_GPIO_54_AL}, // Reserved
{bp_usGpioLedReserved, .u.us = BP_GPIO_3_AL}, // USB's power
{bp_usGpioLedReserved, .u.us = BP_GPIO_0_AL}, // wps led
{bp_usGpioLedReserved, .u.us = BP_GPIO_30_AL}, // 2.5G red led
{bp_usGpioLedReserved, .u.us = BP_GPIO_27_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_21_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_26_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_17_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_18_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_19_AL},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_17_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_18_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_19_AH},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm962118ref[] = {
{bp_cpBoardId, .u.cp = "962118REF"},
{bp_ulCompatChipId, .u.ul = 0x62118},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
static bp_elem_t g_bcm94908ref_extphy[] = {
{bp_cpBoardId, .u.cp = "94908REF_XPHY"},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_usGpioPhyReset, .u.us = BP_GPIO_31_AH},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
/* Board with 2.5GPHY connected to WAN port */
static bp_elem_t g_bcm94908ref_wan2p5g[] = {
{bp_cpBoardId, .u.cp = "94908REF_W2P5"},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
static bp_elem_t g_bcm94908ref_moca[] = {
{bp_cpBoardId, .u.cp = "94908REF_MOCA"},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
{bp_ulCrossbar, .u.ul = 11},
{bp_ulCrossbarPhyId, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usMocaType0, .u.us = BP_MOCA_TYPE_LAN},
{bp_usMocaRfBand, .u.us = BP_MOCA_RF_BAND_EXT_D},
{bp_usExtIntrMocaHostIntr, .u.us = BP_EXT_INTR_TYPE_IRQ_HIGH_LEVEL | BP_EXT_INTR_2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
#if !defined(_CFE_)
{bp_pMocaInit, .u.ptr = (void*)moca6802InitSeq},
#endif
{bp_usGpioSpiSlaveReset, .u.us = BP_GPIO_7_AL},
{bp_usGpioSpiSlaveBootMode, .u.us = BP_GPIO_80_AL},
{bp_usSpiSlaveBusNum, .u.us = HS_SPI_BUS_NUM},
{bp_usSpiSlaveSelectNum, .u.us = 4},
{bp_usSpiSlaveSelectGpioNum, .u.us = 21},
{bp_usSpiSlaveMode, .u.us = SPI_MODE_3},
{bp_ulSpiSlaveCtrlState, .u.ul = SPI_CONTROLLER_STATE_GATE_CLK_SSOFF},
{bp_ulSpiSlaveMaxFreq, .u.ul = 12500000},
{bp_ucDspType0, .u.uc = BP_VOIP_NO_DSP},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
/* 94908REF_PLC has been hijacked to support MOCAWAN */
static bp_elem_t g_bcm94908ref_plc[] = {
{bp_cpBoardId, .u.cp = "94908REF_PLC"},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_ulCrossbar, .u.ul = 11},
{bp_ulCrossbarPhyId, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0xf},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_usMocaType0, .u.us = BP_MOCA_TYPE_WAN},
{bp_usMocaRfBand, .u.us = BP_MOCA_RF_BAND_EXT_D},
{bp_usExtIntrMocaHostIntr, .u.us = BP_EXT_INTR_TYPE_IRQ_HIGH_LEVEL | BP_EXT_INTR_2},
{bp_usGpio_Intr, .u.us = BP_GPIO_20_AL},
#if !defined(_CFE_)
{bp_pMocaInit, .u.ptr = (void*)moca6802InitSeq},
#endif
{bp_usGpioSpiSlaveReset, .u.us = BP_GPIO_7_AL},
{bp_usGpioSpiSlaveBootMode, .u.us = BP_GPIO_80_AL},
{bp_usSpiSlaveBusNum, .u.us = HS_SPI_BUS_NUM},
{bp_usSpiSlaveSelectNum, .u.us = 4},
{bp_usSpiSlaveSelectGpioNum, .u.us = 21},
{bp_usSpiSlaveMode, .u.us = SPI_MODE_3},
{bp_ulSpiSlaveCtrlState, .u.ul = SPI_CONTROLLER_STATE_GATE_CLK_SSOFF},
{bp_ulSpiSlaveMaxFreq, .u.ul = 12500000},
{bp_ucDspType0, .u.uc = BP_VOIP_NO_DSP},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
static bp_elem_t g_bcm94906ref[] = {
{bp_cpBoardId, .u.cp = "94906REF"},
{bp_ulCompatChipId, .u.ul = 0x4906},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_EMMC},
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH},
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_8_AH},
{bp_usGpioBtWake, .u.us = BP_GPIO_9_AH},
{bp_usGpioUart2Cts, .u.us = BP_GPIO_10_AH},
{bp_usGpioUart2Rts, .u.us = BP_GPIO_11_AH},
{bp_usGpioUart2Sdin, .u.us = BP_GPIO_12_AH}, // uart2 is /dev/ttyH0
{bp_usGpioUart2Sdout, .u.us = BP_GPIO_13_AH}, // uart2 is /dev/ttyH0
{bp_usGpioI2cSda, .u.us = BP_GPIO_18_AH },
{bp_usGpioI2cScl, .u.us = BP_GPIO_19_AH },
{bp_usButtonIdx, .u.us = 0},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_23_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{ bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usButtonIdx, .u.us = 1},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_22_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 56},
{bp_usSpiSlaveSelectNum, .u.us = 5}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 20},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_30_AH}, // placeholder for GPHY4 Link/Act
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, // placeholder for GPHY4 Speed
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH}, // placeholder for GPHY4 Speed
{bp_usGpioLedSesWireless, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_usGpioLedWanData, .u.us = BP_SERIAL_GPIO_16_AH}, /* sw control led */
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_usGpioLedAggregateLnk, .u.us = BP_SERIAL_GPIO_24_AH},
{bp_usGpioLedAggregateAct, .u.us = BP_SERIAL_GPIO_25_AH},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_18_AH},
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_19_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm94906ax68u[] = {
{bp_cpBoardId, .u.cp = "94906AX68U"},
{bp_ulCompatChipId, .u.ul = 0x4906},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_EMMC},
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_4_AL},
//{bp_usGpioI2cSda, .u.us = BP_GPIO_18_AH },
//{bp_usGpioI2cScl, .u.us = BP_GPIO_19_AH },
{bp_usButtonIdx, .u.us = 0}, // Button: reset
#if defined(_CFE_)
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{bp_usGpio_Intr, .u.us = BP_GPIO_23_AL},
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_PRESS },
#else
#ifdef BRCM_BTN_ACTION
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 | BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},
#else
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
#endif
{bp_usGpio_Intr, .u.us = BP_GPIO_23_AL},
#ifdef BRCM_BTN_ACTION
{bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{bp_ulButtonActionParm, .u.ptr = (void*)"Button 1 Press -- Hold for 5s to do restore to default" },
{bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S },
{bp_usCfeResetToDefaultBtnIdx, .u.us = 1 },
#endif
#endif
{bp_usButtonIdx, .u.us = 1}, // Button: wps
{bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{bp_usGpio_Intr, .u.us = BP_GPIO_22_AL},
#ifdef BRCM_BTN_ACTION
{bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
#endif
#if defined(_CFE_)
{bp_usExtIntrResetToDefault, .u.us = BP_EXT_INTR_2},
{bp_usGpio_Intr, .u.us = BP_GPIO_23_AL},
{bp_usExtIntrSesBtnWireless, .u.us = BP_EXT_INTR_3},
{bp_usGpio_Intr, .u.us = BP_GPIO_22_AL},
#endif
{bp_usGpioLedReserved, .u.us = BP_GPIO_20_AL}, // WAN Red LED
{bp_usGpioLedReserved, .u.us = BP_GPIO_21_AL}, // WAN White LED
{bp_usGpioLedReserved, .u.us = BP_GPIO_16_AL}, // LAN LED
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_22_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_23_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
//{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
//{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
//{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
//{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
//{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
//{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_last}
};
static bp_elem_t g_bcm962116ref[] = {
{bp_cpBoardId, .u.cp = "962116REF"},
{bp_ulCompatChipId, .u.ul = 0x62116},
{bp_elemTemplate, .u.bp_elemp = g_bcm94906ref},
{bp_last}
};
/* fake 4906REF board id. Used on 4908 board as 4906 board */
static bp_elem_t g_bcm94906ref_fake[] = {
{bp_cpBoardId, .u.cp = "94906REF_FAKE"},
{bp_ulMaxNumCpu, .u.ul = 2},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_SSC_CONFIG_1},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
static bp_elem_t g_bcm949408eap_extphy[] = {
{bp_cpBoardId, .u.cp = "949408EAP_XPHY"},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x1},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usGpioPhyReset, .u.us = BP_GPIO_31_AL},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
static bp_elem_t g_bcm949408eap_extphy_54991[] = {
{bp_cpBoardId, .u.cp = "949408EAP_54991"},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1f},
{bp_ulPortMap, .u.ul = 0x1},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_27_AH},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_29_AH},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1f | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usGpioPhyReset, .u.us = BP_GPIO_31_AL},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908ref},
{bp_last}
};
static bp_elem_t g_bcm94908eap_4dax[] = {
{bp_cpBoardId, .u.cp = "949408EAP_4DAX"},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_2048MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_elemTemplate, .u.bp_elemp = g_bcm949408eap_extphy},
{bp_last}
};
static bp_elem_t g_bcm94908tbrhx[] = {
{bp_cpBoardId, .u.cp = "94908TBRHX"},
{bp_ulCompatChipId, .u.ul = 0x4908},
{bp_usGpioUart2Cts, .u.us = BP_GPIO_10_AH},
{bp_usGpioUart2Rts, .u.us = BP_GPIO_11_AH},
{bp_usGpioUart2Sdin, .u.us = BP_GPIO_12_AH}, // uart2 is /dev/ttyH0
{bp_usGpioUart2Sdout, .u.us = BP_GPIO_13_AH}, // uart2 is /dev/ttyH0
{bp_usButtonIdx, .u.us = 0},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },
{ bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},
{bp_usButtonIdx, .u.us = 1},
{ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1 },
{ bp_usGpio_Intr, .u.us = BP_GPIO_2_AL},
{ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_0_AL},
{bp_usGpioLedReserved, .u.us = BP_GPIO_3_AL}, // reserved for misc led
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usLinkLed, .u.us = BP_GPIO_31_AL},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0xf},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_26_AL},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_27_AL},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_29_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_32BIT | BP_DDR_SSC_CONFIG_1},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_64_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_63_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_67_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_66_AL},
{bp_last}
};
/* Board with 2.5GPHY connected to LAN port */
static bp_elem_t g_bcm94908tbrhx_extphy[] = {
{bp_cpBoardId, .u.cp = "94908TBRHX_XPHY"},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usLinkLed, .u.us = BP_GPIO_31_AL},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_26_AL},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_27_AL},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_29_AL},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usGpioPhyReset, .u.us = BP_GPIO_22_AL},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908tbrhx},
{bp_last}
};
/* Board with 2.5GPHY connected to WAN port */
static bp_elem_t g_bcm94908tbrhx_wan2p5g[] = {
{bp_cpBoardId, .u.cp = "94908TBRHX_W2P5"},
{bp_usMiiMdc, .u.us = BP_GPIO_48_AH},
{bp_usMiiMdio, .u.us = BP_GPIO_49_AH},
{bp_usGphyBaseAddress, .u.us = BCM94908_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x9},
{bp_ulPhyId0, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ulPhyId3, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulCrossbarPhyId, .u.ul = 0x1e | PHY_EXTERNAL | PHY_TYPE_CL45GPHY},
{bp_ulPortFlags, .u.ul = PORT_FLAG_SWAP_PAIR},
{bp_usGpioPhyReset, .u.us = BP_GPIO_22_AL},
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM94908_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_26_AL},
{bp_ulPhyId1, .u.ul = (BCM94908_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_27_AL},
{bp_ulPhyId2, .u.ul = (BCM94908_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId3, .u.ul = (BCM94908_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usLinkLed, .u.us = BP_GPIO_29_AL},
{bp_ulPhyId7, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM94908_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_elemTemplate, .u.bp_elemp = g_bcm94908tbrhx},
{bp_last}
};
static bp_elem_t g_bcm94906ref2[] = {
{bp_cpBoardId, .u.cp = "94906REF2"},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_64_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_63_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_67_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_66_AL},
{bp_elemTemplate, .u.bp_elemp = g_bcm94906ref},
{bp_last}
};
bp_elem_t * g_BoardParms[] = {
g_bcm94908sv, g_bcm94908dvt, g_bcm94908dvt_sfpwan, g_bcm94908ref, g_bcm94908ax86u, g_bcm94908ref_extphy, g_bcm94908ref_moca,
g_bcm94908ref_plc, g_bcm94906ref, g_bcm94906ax68u, g_bcm94906ref_fake, g_bcm94908ref_wan2p5g, g_bcm962118ref, g_bcm962116ref,
g_bcm949408eap_extphy, g_bcm94908tbrhx, g_bcm94908tbrhx_extphy, g_bcm94908tbrhx_wan2p5g,
g_bcm94906ref2, g_bcm949408eap_extphy_54991, g_bcm94908eap_4dax, 0
};
Reference in a new issue View git blame Copy permalink