mirrors/asuswrt-merlin.ng
1
0
Fork 0
mirror of https://github.com/gnuton/asuswrt-merlin.ng.git synced 2025-05-19 07:51:46 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
asuswrt-merlin.ng/release/src-rt-5.02axhnd.675x/shared/opensource/boardparms/bcm963xx/boardparms_63148.c

713 lines
45 KiB
C
Raw Permalink Blame History

#include "bp_defs.h"
#include "boardparms.h"
#include "bcmSpiRes.h"
extern BpCmdElem moca6802InitSeq[];
/* Only needed for internal GPHYs; by default internal GPHYs do not adv. 1000HD/100HD/10FD/10HD capabilities;
* There are some NICs that will not negotiate 100FD - so need to advertise 100HD to link up with those NICs */
#define BCM963148_PHY_BASE 0x8
static bp_elem_t g_bcm963148sv[] = {
{bp_cpBoardId, .u.cp = "963148SV"},
{bp_usGpioUart2Sdin, .u.us = BP_GPIO_5_AH}, // uart2 is /dev/ttyS1
{bp_usGpioUart2Sdout, .u.us = BP_GPIO_6_AH}, // stty 115200 < /dev/ttyS1 to set speed
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH}, // NOTE: bp_ulGpioOverlay is no longer used
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND}, // Enable NAND pinmux even on SPI boot
{bp_ulAfeId0, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_ulAfeId1, .u.ul = BP_AFE_CHIP_CH1 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_usGpioIntAFELDPwr, .u.us = BP_GPIO_52_AH}, // Line Driver 0 = "Int"
{bp_usGpioIntAFELDData, .u.us = BP_GPIO_53_AH},
{bp_usGpioIntAFELDClk, .u.us = BP_GPIO_55_AH},
{bp_usGpioExtAFELDPwr, .u.us = BP_GPIO_54_AH}, // Line Driver 1 = "Ext"
{bp_usGpioExtAFELDData, .u.us = BP_GPIO_9_AH},
{bp_usGpioExtAFELDClk, .u.us = BP_GPIO_10_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 127},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = 25},
{bp_usSpiSlaveSelectNum, .u.us = 4},
{bp_usSpiSlaveSelectGpioNum, .u.us = 8},
{bp_usGphyBaseAddress, .u.us = BCM963148_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AL},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AL},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_8},
{bp_last}
};
static bp_elem_t g_bcm963148dvt[] = {
{bp_cpBoardId, .u.cp = "963148DVT"},
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH}, // NOTE: bp_ulGpioOverlay is no longer used
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND}, // Enable NAND pinmux even on SPI boot
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedBlStop, .u.us = BP_GPIO_30_AL},
{bp_usGpioLedPwmReserved, .u.us = BP_GPIO_17_AL}, // pinmux for PWM2 LED
{bp_usGpioLedWanData, .u.us = BP_GPIO_15_AL},
{bp_usGpioLedWanError, .u.us = BP_GPIO_16_AL},
{bp_usGpioLedAdsl, .u.us = BP_GPIO_31_AL},
{bp_usGpioSecLedAdsl, .u.us = BP_GPIO_18_AL},
{bp_usExtIntrSesBtnWireless, .u.us = BP_EXT_INTR_1},
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_24_AL},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_20_AL}, // LED register bit 20, shifted serially
{bp_ulAfeId0, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_ulAfeId1, .u.ul = BP_AFE_CHIP_CH1 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_usGpioIntAFELDPwr, .u.us = BP_GPIO_52_AH}, // Line Driver 0 = "Int"
{bp_usGpioIntAFELDData, .u.us = BP_GPIO_53_AH},
{bp_usGpioIntAFELDClk, .u.us = BP_GPIO_55_AH},
{bp_usGpioExtAFELDPwr, .u.us = BP_GPIO_54_AH}, // Line Driver 1 = "Ext"
{bp_usGpioExtAFELDData, .u.us = BP_GPIO_9_AH},
{bp_usGpioExtAFELDClk, .u.us = BP_GPIO_10_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 127},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = 25},
{bp_usSpiSlaveSelectNum, .u.us = 4},
{bp_usSpiSlaveSelectGpioNum, .u.us = 8},
{bp_usGphyBaseAddress, .u.us = BCM963148_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
// to avoid conflicting P0 and P11 phy address of 1
// the intergrated Quad GPHY address is now 0x8, 0x9, 0xa, 0xb
// the intergrated Single GPHY address 0xc
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulCrossbar, .u.ul = 11},
{bp_ulCrossbarPhyId, .u.ul = 0x1 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0xbf},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AL},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AL},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId4, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_ulPhyId5, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL}, // bottom right.
{bp_ulPhyId7, .u.ul = 0x0 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16},
{bp_last}
};
static bp_elem_t g_bcm963148dvt_p300[] = {
{bp_cpBoardId, .u.cp = "963148DVT_P300"},
{bp_usExtIntrSesBtnWireless, .u.us = BP_EXT_INTR_0},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_26_AL},
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_27_AL},
{bp_usGpioPotsLed, .u.us = BP_SERIAL_GPIO_28_AL},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulCrossbar, .u.ul = 11},
{bp_ulCrossbarPhyId, .u.ul = 0x1 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0xbf},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AL},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AL},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId4, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_ulPhyId5, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL}, // bottom right.
{bp_ulPhyId7, .u.ul = 0x0 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148dvt},
{bp_last}
};
static bp_elem_t g_bcm963148ref[] = {
{bp_cpBoardId, .u.cp = "963148REF"},
{bp_usSerialLedData, .u.us = BP_GPIO_0_AH}, // NOTE: bp_ulGpioOverlay is no longer used
{bp_usSerialLedClk, .u.us = BP_GPIO_1_AH},
{bp_usSerialLedMask, .u.us = BP_GPIO_2_AH},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND}, // Enable NAND pinmux even on SPI boot
{bp_usGpioLedPwmReserved, .u.us = BP_GPIO_17_AL}, // pinmux for PWM2 LED
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AL}, // placeholder for SF2 Port4 SPD0
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AL}, // placeholder for SF2 Port4 SPD1
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_29_AL},
{bp_usGpioLedBlStop, .u.us = BP_GPIO_30_AL},
{bp_usExtIntrResetToDefault, .u.us = BP_EXT_INTR_0},
{bp_usExtIntrSesBtnWireless, .u.us = BP_EXT_INTR_1},
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_24_AL},
{bp_usGpioLedAdsl, .u.us = BP_GPIO_31_AL},
{bp_usGpioSecLedAdsl, .u.us = BP_GPIO_27_AL},
{bp_usGpioLedWanData, .u.us = BP_GPIO_15_AL},
{bp_usGpioSecLedWanData, .u.us = BP_GPIO_19_AL},
{bp_ulAfeId0, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_ulAfeId1, .u.ul = BP_AFE_CHIP_CH1 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_usGpioIntAFELDPwr, .u.us = BP_GPIO_52_AH}, // Line Driver 0 = "Int"
{bp_usGpioIntAFELDData, .u.us = BP_GPIO_53_AH},
{bp_usGpioIntAFELDClk, .u.us = BP_GPIO_55_AH},
{bp_usGpioExtAFELDPwr, .u.us = BP_GPIO_54_AH}, // Line Driver 1 = "Ext"
{bp_usGpioExtAFELDData, .u.us = BP_GPIO_9_AH},
{bp_usGpioExtAFELDClk, .u.us = BP_GPIO_10_AH},
{bp_usGpioI2cSda, .u.us = BP_GPIO_117_AH }, /* i2c and sgmii fiber detect selection for serdes interface */
{bp_usGpioI2cScl, .u.us = BP_GPIO_119_AH },
{bp_usSgmiiDetect, .u.us = BP_GPIO_28_AL},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 127},
{bp_usSpiSlaveSelectNum, .u.us = 4},
{bp_usSpiSlaveSelectGpioNum, .u.us = 8},
{bp_usSpiSlaveSelectNum, .u.us = 5},
{bp_usSpiSlaveSelectGpioNum, .u.us = 7},
{bp_usGphyBaseAddress, .u.us = BCM963148_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL}, /* use the WAN LED from runner */
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
#if 0 /* for RGMII daughter card */
{bp_ulPhyId4, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL}, /* make sure the phy id matches the one on the plug in rgmii phy daughter card */
{bp_ulPhyId5, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL}, /* make sure the phy id matches the one on the plug in rgmii phy daughter card */
#endif
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_25_AH},
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_26_AH},
{bp_usGpioPotsLed, .u.us = BP_SERIAL_GPIO_28_AH},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_132_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_133_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_134_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_135_AL},
{bp_last}
};
static bp_elem_t g_bcm963148ref_p502[] = {
{bp_cpBoardId, .u.cp = "963148REF_P502"},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH}, // placeholder for SF2 Port4 SPD0
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, // placeholder for SF2 Port4 SPD1
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AH},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AH},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
#if 0 /* for RGMII daughter card */
{bp_ulPhyId4, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL}, /* make sure the phy id matches the one on the plug in rgmii phy daughter card */
{bp_ulPhyId5, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL}, /* make sure the phy id matches the one on the plug in rgmii phy daughter card */
#endif
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref},
{bp_last}
};
static bp_elem_t g_bcm963148ref_bmu[] = {
{bp_cpBoardId, .u.cp = "963148REF_BMU"},
{bp_usBatteryEnable, .u.us = 1},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_I2S}, // Enable I2S pinmux
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND}, // Enable NAND pinmux even on SPI boot
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_22_AL},
{bp_usGpioLedBlStop, .u.us = BP_GPIO_23_AL},
{bp_usExtIntrResetToDefault, .u.us = BP_EXT_INTR_0},
{bp_usExtIntrSesBtnWireless, .u.us = BP_EXT_INTR_1},
{bp_usGpioLedSesWireless, .u.us = BP_GPIO_24_AL},
{bp_usGpioLedAdsl, .u.us = BP_GPIO_17_AL},
{bp_usGpioSecLedAdsl, .u.us = BP_GPIO_21_AL},
{bp_ulAfeId0, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_LD_REV_6303_VR5P3 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_ulAfeId1, .u.ul = BP_AFE_CHIP_CH1 | BP_AFE_LD_6303 | BP_AFE_LD_REV_6303_VR5P3 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_40 },
{bp_usGpioAFEVR5P3PwrEn, .u.us = BP_GPIO_37_AH},
{bp_usGpioIntAFELDPwr, .u.us = BP_GPIO_52_AH}, // Line Driver 0 = "Int"
{bp_usGpioIntAFELDData, .u.us = BP_GPIO_53_AH},
{bp_usGpioIntAFELDClk, .u.us = BP_GPIO_55_AH},
{bp_usGpioExtAFELDPwr, .u.us = BP_GPIO_54_AH}, // Line Driver 1 = "Ext"
{bp_usGpioExtAFELDData, .u.us = BP_GPIO_9_AH},
{bp_usGpioExtAFELDClk, .u.us = BP_GPIO_10_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = 127},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = 25},
{bp_usSpiSlaveSelectNum, .u.us = 4},
{bp_usSpiSlaveSelectGpioNum, .u.us = 8},
{bp_usVregSync, .u.us = BP_GPIO_18_AH},
{bp_usGphyBaseAddress, .u.us = BCM963148_PHY_BASE}, // use phy addressses on SF2 with base address 0x8
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x4) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x0f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x0) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_0_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_1_AL},
{bp_usLinkLed, .u.us = BP_GPIO_28_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x1) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_2_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x2) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x3) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_GPIO_6_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_7_AL},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ucDspType0, .u.uc = BP_VOIP_DSP},
{bp_ucDspAddress, .u.uc = 0},
{bp_usGpioVoip1Led, .u.us = BP_GPIO_29_AL},
{bp_usGpioVoip2Led, .u.us = BP_GPIO_30_AL},
{bp_usGpioDectLed, .u.us = BP_GPIO_31_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_8},
{bp_last}
};
static bp_elem_t g_bcm963148ref_bmu_i2s[] = {
{bp_cpBoardId, .u.cp = "963148_BMUI2S"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_I2S}, // Enable I2S pinmux
{bp_usGpioVoip1Led, .u.us = BP_GPIO_NONE},
{bp_usGpioVoip2Led, .u.us = BP_GPIO_NONE},
{bp_usGpioDectLed, .u.us = BP_GPIO_NONE},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref_bmu},
{bp_last}
};
static bp_elem_t g_bcm963148ref_plc[] = {
{bp_cpBoardId, .u.cp = "963148REF_PLC"},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL}, /* use the WAN LED from runner */
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x1f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId4, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_PLC},
{bp_ucPhyDevName, .u.cp = "plc%d"},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = RGMII_DIRECT_3P3V },
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref},
{bp_last}
};
static bp_elem_t g_bcm963148ref_moca[] = {
{bp_cpBoardId, .u.cp = "963148REF_MOCA"},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL}, /* use the WAN LED from runner */
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId7, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_usMocaType0, .u.us = BP_MOCA_TYPE_LAN},
{bp_usMocaRfBand, .u.us = BP_MOCA_RF_BAND_D_LOW},
{bp_usExtIntrMocaHostIntr, .u.us = BP_EXT_INTR_TYPE_IRQ_HIGH_LEVEL | BP_EXT_INTR_4},
#if !defined(_CFE_)
{bp_pMocaInit, .u.ptr = (void*)moca6802InitSeq},
#endif
{bp_usGpioSpiSlaveReset, .u.us = BP_GPIO_110_AL},
{bp_usGpioSpiSlaveBootMode, .u.us = BP_GPIO_14_AL},
{bp_usSpiSlaveBusNum, .u.us = HS_SPI_BUS_NUM},
{bp_usSpiSlaveSelectNum, .u.us = 3},
{bp_usSpiSlaveSelectGpioNum, .u.us = 26},
{bp_usSpiSlaveMode, .u.us = SPI_MODE_3},
{bp_ulSpiSlaveCtrlState, .u.ul = SPI_CONTROLLER_STATE_GATE_CLK_SSOFF},
{bp_ulSpiSlaveMaxFreq, .u.ul = 12500000},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref},
{bp_last}
};
static bp_elem_t g_bcm963148ref_bhr[] = {
{bp_cpBoardId, .u.cp = "963148REF_BHR"},
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL}, /* use the WAN LED from runner */
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AL},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AL},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AL},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AL},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AL},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId7, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_usMocaType0, .u.us = BP_MOCA_TYPE_WAN},
{bp_usMocaRfBand, .u.us = BP_MOCA_RF_BAND_D_HIGH},
{bp_usExtIntrMocaHostIntr, .u.us = BP_EXT_INTR_TYPE_IRQ_HIGH_LEVEL | BP_EXT_INTR_2},
#if !defined(_CFE_)
{bp_pMocaInit, .u.ptr = (void*)moca6802InitSeq},
#endif
{bp_usGpioSpiSlaveReset, .u.us = BP_GPIO_115_AL},
{bp_usGpioSpiSlaveBootMode, .u.us = BP_GPIO_60_AL},
{bp_usSpiSlaveBusNum, .u.us = HS_SPI_BUS_NUM},
{bp_usSpiSlaveSelectNum, .u.us = 2},
{bp_usSpiSlaveSelectGpioNum, .u.us = 25},
{bp_usSpiSlaveMode, .u.us = SPI_MODE_3},
{bp_ulSpiSlaveCtrlState, .u.ul = SPI_CONTROLLER_STATE_GATE_CLK_SSOFF},
{bp_ulSpiSlaveMaxFreq, .u.ul = 12500000},
{bp_usMocaType1, .u.us = BP_MOCA_TYPE_LAN},
{bp_usMocaRfBand, .u.us = BP_MOCA_RF_BAND_D_LOW},
{bp_usExtIntrMocaHostIntr, .u.us = BP_EXT_INTR_TYPE_IRQ_HIGH_LEVEL | BP_EXT_INTR_4},
#if !defined(_CFE_)
{bp_pMocaInit, .u.ptr = (void*)moca6802InitSeq},
#endif
{bp_usGpioSpiSlaveReset, .u.us = BP_GPIO_110_AL},
{bp_usGpioSpiSlaveBootMode, .u.us = BP_GPIO_14_AL},
{bp_usSpiSlaveBusNum, .u.us = HS_SPI_BUS_NUM},
{bp_usSpiSlaveSelectNum, .u.us = 3},
{bp_usSpiSlaveSelectGpioNum, .u.us = 26},
{bp_usSpiSlaveMode, .u.us = SPI_MODE_3},
{bp_ulSpiSlaveCtrlState, .u.ul = SPI_CONTROLLER_STATE_GATE_CLK_SSOFF},
{bp_ulSpiSlaveMaxFreq, .u.ul = 12500000},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref},
{bp_last}
};
static bp_elem_t g_bcm963148ref_p502_plc[] = {
{bp_cpBoardId, .u.cp = "963148P502_PLC"},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH}, // placeholder for SF2 Port4 SPD0
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, // placeholder for SF2 Port4 SPD1
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x1f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AH},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AH},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId4, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_PLC},
{bp_ucPhyDevName, .u.cp = "plc%d"},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = RGMII_DIRECT_3P3V },
{bp_ulPortFlags, .u.ul = PORT_FLAG_TX_INTERNAL_DELAY | PORT_FLAG_RX_INTERNAL_DELAY},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref_plc},
{bp_last}
};
static bp_elem_t g_bcm963148ref_p502_moca[] = {
{bp_cpBoardId, .u.cp = "963148P502_MOCA"},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH}, // placeholder for SF2 Port4 SPD0
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, // placeholder for SF2 Port4 SPD1
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 10},
{bp_ulCrossbarPhyId, .u.ul = (BCM963148_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulCrossbar, .u.ul = 9},
{bp_ulCrossbarPhyId, .u.ul = 6 | PHY_INTEGRATED_VALID | MAC_IF_SERDES},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AH},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AH},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId7, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref_moca},
{bp_last}
};
static bp_elem_t g_bcm963148ref_p502_bhr[] = {
{bp_cpBoardId, .u.cp = "963148P502_BHR"},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_8_AH}, // placeholder for SF2 Port4 SPD0
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, // placeholder for SF2 Port4 SPD1
{bp_ucPhyType0, .u.uc = BP_ENET_NO_PHY}, // Runner
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},
{bp_ucPhyAddress, .u.uc = 0x1e},
{bp_ulPortMap, .u.ul = 0x3},
{bp_ulPhyId0, .u.ul = BP_PHY_ID_NOT_SPECIFIED},
{bp_ulCrossbar, .u.ul = 12},
{bp_ulCrossbarPhyId, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
/* use the WAN LED from runner */
{bp_usSpeedLed100, .u.us = BP_GPIO_20_AL},
{bp_usSpeedLed1000, .u.us = BP_GPIO_21_AL},
{bp_usLinkLed, .u.us = BP_GPIO_22_AL},
{bp_ulPhyId1, .u.ul = GMII_DIRECT | EXTSW_CONNECTED},
{bp_ulPortFlags, .u.ul = PORT_FLAG_MGMT }, // Managment port is on switch
{bp_ucPhyType1, .u.uc = BP_ENET_EXTERNAL_SWITCH},
{bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP}, // Accessing SF2 as MMapped external switch
{bp_ulPortMap, .u.ul = 0x8f},
{bp_ulPhyId0, .u.ul = (BCM963148_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_0_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_1_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_10_AH},
{bp_ulPhyId1, .u.ul = (BCM963148_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_2_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_3_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_11_AH},
{bp_ulPhyId2, .u.ul = (BCM963148_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_4_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_5_AH},
{bp_usLinkLed, .u.us = BP_SERIAL_GPIO_12_AH},
{bp_ulPhyId3, .u.ul = (BCM963148_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},
{bp_usSpeedLed100, .u.us = BP_SERIAL_GPIO_6_AH},
{bp_usSpeedLed1000, .u.us = BP_SERIAL_GPIO_7_AH},
{bp_usLinkLed, .u.us = BP_GPIO_13_AL},
{bp_ulPhyId7, .u.ul = RGMII_DIRECT | MAC_IF_RGMII_2P5V },
{bp_usPhyConnType, .u.us = PHY_CONN_TYPE_MOCA},
{bp_ucPhyDevName, .u.cp = "moca%d"},
{bp_elemTemplate, .u.bp_elemp = g_bcm963148ref_bhr},
{bp_last}
};
bp_elem_t * g_BoardParms[] = {g_bcm963148sv, g_bcm963148dvt, g_bcm963148ref, g_bcm963148ref_bmu, g_bcm963148ref_bmu_i2s, g_bcm963148ref_plc, g_bcm963148ref_moca, g_bcm963148ref_bhr, g_bcm963148dvt_p300,
g_bcm963148ref_p502, g_bcm963148ref_p502_plc, g_bcm963148ref_p502_moca, g_bcm963148ref_p502_bhr, 0};
Reference in a new issue View git blame Copy permalink