asuswrt-merlin.ng/release/src-rt-5.02axhnd.675x/targets/963158GW/963158GW_ikos

#
# Automatically generated by make menuconfig: don't edit
#

#
# Chip and Board configuration selection
#

#
# Chip selection
#
# BRCM_63268 is not set
# BRCM_6838 is not set
# BRCM_6848 is not set
# BRCM_6858 is not set
# BRCM_6836 is not set
# BRCM_6846 is not set
# BRCM_6856 is not set
# BRCM_63138 is not set
# BRCM_63148 is not set
BRCM_63158=y
# BRCM_63381 is not set
# BRCM_47189 is not set
# BRCM_4908 is not set
BRCM_CHIP=63158
BRCM_CHIP_REV="B0"
BRCM_BUILD_MULTIARCH=""
BRCM_BOARD_ID="ikos"
BRCM_VOICE_BOARD_ID=""
BRCM_GPON_SERIAL_NUMBER=
BRCM_GPON_PASSWORD=
BRCM_GPON_CT_LOID=
BRCM_GPON_CT_PASSWORD=
BRCM_FLASHBLK_SIZE=320
BRCM_NUM_MAC_ADDRESSES=11
BRCM_BASE_MAC_ADDRESS="02:10:18:01:00:01"
BRCM_PSI_SIZE=48
BRCM_BACKUP_PSI=
BRCM_MAIN_TP_NUM=0

#
# Toolchain selection
#
USER_ARCH_ARM=y
# USER_ARCH_AARCH64 is not set
PROFILE_ARCH=arm
KERNEL_ARCH=aarch64
BRCM_UCLIBC=y
# BRCM_GLIBC is not set

#
# File system selection
#
# BRCM_ROOTFS_SQUASHFS is not set
# BRCM_ROOTFS_ALL is not set
BRCM_ROOTFS_CONFIG=y
BRCM_FLASH_BUILD_NAND=y
# BRCM_FLASH_NAND_LAYOUT_SPLIT is not set
BRCM_FLASH_NAND_LAYOUT_PUREUBI=y
BRCM_FLASH_NAND_ROOTFS_UBIFS=y
# BRCM_FLASH_NAND_ROOTFS_SQUBI is not set
# BUILD_EMMC_IMG is not set
BRCM_KERNEL_ROOTFS=all

#
# NAND Options 
#
BUILD_NAND_KERNEL_LZMA=y
# BUILD_NAND_KERNEL_LZ4 is not set
BUILD_NAND_IMG_BLKSIZE_128KB=y
# BUILD_NAND_IMG_BLKSIZE_256KB is not set
BUILD_NAND_IMG_BLKSIZE_512KB=y
# BUILD_NAND_IMG_BLKSIZE_1024KB is not set
# BRCM_ROOTFS_RW is not set
BUILD_MTDUTILS=y
BRCM_MISC1_PARTITION_SIZE=0
BRCM_MISC2_PARTITION_SIZE=0
BRCM_MISC3_PARTITION_SIZE=0
BRCM_MISC4_PARTITION_SIZE=4
# BRCM_CFG_USER_PARTITIONS is not set
BRCM_RAMDISK_BOOT_EN=y
BRCM_RAMDISK_SIZE=8192
# BRCM_NFS_MOUNT_EN is not set
# BRCM_INCREMENTAL_IMAGE_LOAD is not set

#
# Kernel configuration selection
#
# LINUX_3_4_0_RT is not set
# LINUX_3_14_0 is not set
LINUX_4_1_0=y
PROFILE_KERNEL_VER=LINUX_4_1_0
BRCM_SMP_EN=y
# BRCM_KERNEL_PREEMPT is not set
BRCM_SCHED_RT_PERIOD=1000000
BRCM_SCHED_RT_RUNTIME=1000000
# BRCM_SCHED_RT_SHARE is not set
# BRCM_PROC_CPU_AFFINITY_HINT is not set
# BRCM_CONFIG_HIGH_RES_TIMERS is not set
# BCM_HARDIRQ_COUNT_CYCLES is not set
# BCM_CGROUPS is not set
# BCM_KERNEL_CMDLINE_BOOL is not set
# BRCM_ANDROID is not set
# BRCM_WAN_2_WAN_FWD_ENABLED is not set
# BRCM_KERNEL_BONDING is not set
# BRCM_RUNNER_FLOODING is not set
# BP_PHYS_INTF is not set

#
# Kernel Cryptographic selection
#
# BRCM_KERNEL_CRYPTO is not set
# BRCM_KERNEL_CRYPTO_HMAC is not set
# BRCM_KERNEL_CRYPTO_NULL is not set
# BRCM_KERNEL_CRYPTO_MD5 is not set
# BRCM_KERNEL_CRYPTO_SHA1 is not set
# BRCM_KERNEL_CRYPTO_SHA2 is not set
# BRCM_KERNEL_CRYPTO_DES is not set
# BRCM_KERNEL_CRYPTO_AES is not set

#
# Misc Drivers (other drivers are grouped with their features)
#
# BRCM_DRIVER_PCI is not set
# BRCM_PCIE_SSC is not set
# BRCM_PCIE_PLATFORM is not set
# BRCM_DRIVER_PCI_MSI is not set
# BRCM_DRIVER_I2C is not set
# BRCM_DRIVER_OPTICALDET is not set
# BRCM_DRIVER_HS_UART is not set
# BRCM_DRIVER_EMMC is not set
# BRCM_DRIVER_I2S is not set
# BRCM_DRIVER_ISDN is not set
BRCM_DRIVER_EXT_TIMER=y
# BRCM_DRIVER_WDT is not set
BRCM_DRIVER_PMC=y

#
# Major Feature Selection
#
# BUILD_BRCM_BASE_SHELL is not set
BUILD_BRCM_CMS=y
# BUILD_BRCM_HNDROUTER is not set
# BUILD_DM_LEGACY98 is not set
BUILD_DM_HYBRID=y
# BUILD_DM_PURE181 is not set
# BUILD_DM_DETECT is not set
# DESKTOP_LINUX is not set
BUILD_BUSYBOX=dynamic

#
# Busybox Options 
#
# BUILD_BUSYBOX_BRCM_LITE is not set
BUILD_BUSYBOX_BRCM_FULL=y
# BUILD_BUSYBOX_BRCM_VANILLA is not set
# BUILD_WGET_HTTPS is not set
BUILD_BUSYBOX_GUNZIP=y
# BUILD_BUSYBOX_GZIP is not set
# BUILD_BUSYBOX_UNTAR is not set
# BUILD_BUSYBOX_TAR is not set
# BUILD_BUSYBOX_TELNET is not set
# BUILD_BUSYBOX_VI is not set
# BUILD_BUSYBOX_AWK is not set
# BUILD_BUSYBOX_PIDOF is not set
# BUILD_BUSYBOX_NTPD is not set
# BUILD_IPV6 is not set
# BUILD_VCONFIG is not set
# BUILD_BRCM_INTERNAL is not set
# BRCM_DRIVER_SPDSVC is not set
# BUILD_BOOT_BLOCK_HOUSEKEEPING is not set

#
# DSL/XTM selection
#
# BUILD_PHY_ADSL is not set
# BUILD_PHY_VDSL is not set
BUILD_PHY_MULTIMODE=y
# BRCM_PHY_BONDING is not set
# BRCM_MULTI_PHY is not set
# BRCM_EXT_PHY_BONDING is not set
# BRCM_PHY_BONDING5B is not set
# BRCM_PHY_GINP_RTX is not set
# BRCM_PHY_BONDING_C0 is not set
# BRCM_PHY_GFAST is not set
# BRCM_PHY_CO is not set
BRCM_ADSL_ANNEX_A=y
# BRCM_ADSL_ANNEX_B is not set
# BRCM_ADSL_ANNEX_C is not set
# BRCM_ADSL_SADSL is not set
BRCM_ADSL_STANDARD=ANNEX_A
CPE_ANNEX_A=y
# BRCM_DRIVER_ADSL is not set
# BUILD_DSL is not set
# BUILD_XDSLCTL is not set
# BUILD_DSLDIAGD is not set
# BUILD_DSL_LOOP_DIAG is not set
# BRCM_DRIVER_XTM is not set
# BUILD_XTMCTL is not set
# BUILD_ATMWAN is not set
# BUILD_PTMWAN is not set
# BUILD_ATMLOOPBACK is not set
# BUILD_QUICKSETUP is not set
# BRCM_DRIVER_EXT_BONDING is not set

#
# GPON Selection
#
# BRCM_DRIVER_GPON is not set
BCM_MAX_GEM_PORTS=0
# BUILD_OMCI is not set
# BUILD_BCMIPC is not set
# BUILD_OMCI_AUTH is not set
# BUILD_GPONIF is not set
# BUILD_GPOND is not set
# BUILD_GPONCTL is not set
# USE_GPONRG_OMCI_LIGHT is not set
# USE_GPONRG_OMCI_FULL is not set
USE_GONRG_NONE=y
BUILD_GPONRG_OMCI_LIGHT=
BUILD_GPONRG_OMCI_FULL=
# BUILD_GPON_ONU is not set
# BRCM_GPON_SFU is not set
# BRCM_GPON_HGU is not set
BRCM_GPON_NONE=y


#
# Ethernet, Switch, and VLAN Selection
#
# BRCM_DRIVER_ETHERNET is not set
BRCM_SWITCH_SCHED_SP=y
# BRCM_SWITCH_SCHED_WRR is not set
# BUILD_BCM_ALLOW_REAL_HW_SWITCHING is not set
BUILD_ETHSWCTL=y
# BUILD_SWMDK is not set
# BUILD_MDK_SHELL is not set
# BRCM_DRIVER_VLAN is not set
# BUILD_VLANCTL is not set
# BUILD_ETHTOOL is not set

#
# USB, SATA and Storage Options Selection
#
# BUILD_SATA is not set
# BRCM_DRIVER_SATA_TEST is not set
# LINUX_DRIVER_USB_HOST is not set
# LINUX_DRIVER_USB3_HOST is not set
# LINUX_DRIVER_USBNET is not set
# LINUX_KERNEL_USBMASS is not set
# LINUX_KERNEL_USB_DEVICEFS is not set
# BUILD_LIBUSB is not set
# BUILD_FTPD is not set
BUILD_FTPD_STORAGE=
# BUILD_STORAGESERVICE is not set
# BRCM_DRIVER_USB is not set

#
# Moca Selection
#
# BRCM_DRIVER_MoCA is not set

#
# WLAN Selection
#
# BRCM_WAPI is not set
BUILD_WIFIWAN=
# BRCM_WLMEDIA is not set
WLBRAND_none=y
BRCM_WLBRAND=
BCM_WLIMPL=
# BUILD_WLCTL is not set
# BUILD_DHDCTL is not set
# BUILD_WLHSPOT is not set
# BUILD_WBD is not set
# BUILD_WLVISUALIZATION is not set
# BUILD_UNIFIED_WLMNGR is not set
# BUILD_BRCM_CPEROUTER is not set
# BUILD_NAS is not set
# WLSETUP_WPS is not set
WLSETUP_none=y
BUILD_WPS_BTN=
BUILD_WSC=
# BUILD_NVRAM is not set

#
# Voice/Phone Selection
#
# BRCM_VOICE_SUPPORT is not set

#
# WAN Protocols and VPN
#
# BUILD_PPPD is not set
# PPP_AUTODISCONN is not set
# BUILD_WANVLANMUX is not set
# BUILD_IPSEC_TOOLS is not set
# BUILD_OPENVPN is not set
# BUILD_L2TPAC is not set
# BUILD_PPTPAC is not set
# BUILD_GRE_TUNNEL is not set
# BUILD_ACCEL_PPTP is not set

#
# Firewall, ALGs, and Networking Features
#

#
# Netfilter and firewall selection
#
# BRCM_KERNEL_NETFILTER is not set
# BRCM_KERNEL_NF_FIREWALL is not set
# BRCM_KERNEL_NF_MANGLE is not set
# BRCM_KERNEL_NF_NAT is not set
# BRCM_KERNEL_NF_DYNDSCP is not set
# BRCM_KERNEL_NF_LAYER7_FILTER is not set
# BRCM_KERNEL_NF_NAT_ALG_FTP is not set
# BRCM_KERNEL_NF_NAT_ALG_SIP is not set
# BRCM_KERNEL_NF_NAT_ALG_TFTP is not set
# BRCM_KERNEL_NF_NAT_ALG_H323 is not set
# BRCM_KERNEL_NF_NAT_ALG_H323_SIGNAL_PROXY is not set
# BRCM_KERNEL_NF_NAT_ALG_IRC is not set
# BRCM_KERNEL_NF_NAT_ALG_WM is not set
# BRCM_KERNEL_NF_NAT_ALG_PT is not set
# BRCM_KERNEL_NF_NAT_ALG_PPTP is not set
# BRCM_KERNEL_NF_NAT_ALG_IPSEC is not set
# BRCM_KERNEL_NF_NAT_ALG_RTSP is not set
# BRCM_KERNEL_NF_NAT_ALG_SNMP is not set
# BRCM_KERNEL_NF_NAT_ALG_TALK is not set
# BRCM_KERNEL_NF_LOG is not set
# BRCM_KERNEL_NF_PPPREMOTE is not set
# BUILD_CONNTRACK_TOOLS is not set
# BUILD_IPTABLES is not set
# BUILD_EBTABLES is not set
# BUILD_TOD is not set
# BUILD_URLFILTER is not set
BUILD_BRCTL=dynamic
# BUILD_UDHCP is not set
# BUILD_SNTP is not set
# DRELAY_DNSPROBE is not set
DRELAY_DPROXY=y
# DRELAY_DPROXYWITHPROBE is not set
# DRELAY_NONE is not set
BUILD_DNSPROBE=
BUILD_DPROXY=dynamic
BUILD_DPROXYWITHPROBE=
# BUILD_DNSSPOOF is not set
# BUILD_DDNSD is not set
# BUILD_IPROUTE2 is not set
# BUILD_ZEBRA is not set
# BUILD_MCAST_PROXY is not set
# BUILD_MCAST_SNOOP is not set
# BUILD_PCP is not set
# BCM_JUMBO_FRAME is not set
# BRCM_DRIVER_TM is not set

#
# Traffic Control selection
#
# BRCM_KERNEL_NETQOS is not set
# BRCM_TC_RATE_LIMIT is not set
# BRCM_TC_POLICING is not set
# BUILD_DPI is not set
# BUILD_MAP is not set
# BUILD_MPTCP is not set

#
# Datapath
#

#
# Packet Acceleration
#
# BRCM_DRIVER_PKTFLOW is not set
# BRCM_DRIVER_FBOND is not set

#
# Runner Data Path API Selection
#
# BUILD_RDPA is not set

#
# Buffer Pool Manager and Ingress QoS
#
# BRCM_DRIVER_BPM is not set
# BRCM_DRIVER_INGQOS is not set

#
# Broadcom Execution Environment Platform (BEEP)
#
# BUILD_JVM_CLASSPATH is not set
# BUILD_JVM_JAMVM is not set
# BUILD_OSGI_FELIX is not set
# BUILD_MODSW_EE is not set
# BUILD_MODSW_CLI is not set
# BUILD_MODSW_WEBUI is not set

#
# Bootloader and Secure Boot Options
#
# BUILD_DYNAMIC_CFE is not set
SECURE_BOOT_ARCH=GEN3
BTRM_BOOT_ONLY=y
BTRM_NAND_BOOT_PARTITION_SIZE=1024
BTRM_NUM_IMAGES_IN_PARTITION=6
BTRM_IMAGE_SIZE_ALLOCATION=128
BTRM_NUM_NVRAM_DATA_IN_PARTITION=6
# BUILD_SECURE_BOOT is not set

#
# Security Features
#

#
# Other Features
#
# BRCM_DRIVER_PWRMNGT is not set
# BRCM_DRIVER_PMD is not set
RDPA_IFILTER_SUPPORT=y
# BRCM_ETH_PWRSAVE is not set
# BRCM_ENERGY_EFFICIENT_ETHERNET is not set
# BRCM_ETH_DEEP_GREEN_MODE is not set
# BRCM_DDR_SELF_REFRESH_PWRSAVE is not set
# BRCM_UBUS4_DCM is not set
# BRCM_XRDP_AUTOGATE is not set
# BRCM_CPUOFF is not set
# BUILD_WL_IDLE_PWRSAVE is not set
BUILD_STANDARD_NAND_DRIVER=y
# BUILD_LEGACY_NAND_DRIVER is not set
# BUILD_TMS is not set
# BRCM_DRIVER_TRNG is not set
# BUILD_RNGD is not set
# BUILD_AUTODETECTION is not set
# BUILD_LEDCTL is not set
# BUILD_BACKUP_PSI is not set
# BUILD_PSICTL is not set
# COMPRESSED_CONFIG_FILE is not set
CMS_CONFIG_COMPAT=y
# CMS_CONFIG_IGNORE_UNRECOGNIZED is not set
# BUILD_IPPD is not set
# BUILD_DLNA is not set
# BUILD_IEEE1905 is not set
# BUILD_CERT is not set
BRCM_DEFAULTCFG=""
# BRCM_DRIVER_TIME_SYNC is not set
# BUILD_LIBJSONC is not set
# BUILD_LIBXML2 is not set
# BUILD_LIBSQLITE is not set
# BUILD_LIBCAP is not set
# BRCM_USER_SSP is not set
# BUILD_LXC is not set
# BUILD_QRCODE is not set
# BUILD_BLUETOOTH_LIB is not set
# BUILD_BCM_RECVFILE is not set
# BCM_SPEEDYGET is not set
# BUILD_OPENVSWITCH is not set
# BUILD_BRCM_AIRIQ is not set
# BUILD_BCM_ASOC_AUDIO is not set

#
# Management Protocols and User Interface Selection
#
# BRCM_DRIVER_SERIAL is not set
ARM_PL011_SERIAL=y
# BUILD_CONSOLED is not set
# BUILD_CLI_MENU is not set
# BUILD_CLI_CMD is not set
# BUILD_HTTPD is not set
# BUILD_HTTPD_SSL is not set
# BUILD_HTTPD_BASIC_SSL is not set
BUILD_HTTPD_none=y
# BUILD_QUICKSETUP is not set
# BRCM_CPU_MEMORY_WEB_PAGE is not set

#
# WebUI language selection
#
BRCM_LANG_EN=y
# BRCM_LANG_CN is not set
# BRCM_LANG_TW is not set
# BRCM_LANG_KR is not set
BRCM_WEBUI_LANG=en_US
# MGMT_TR69C is not set
MGMT_none=y
BUILD_TR69C=
BUILD_TR69C_BEEP_PREINSTALL=
BUILD_TR69C_BEEP_STANDALONE=
BUILD_TR69C_SSL=
BUILD_TR69C_BCM_SSL=
BRCM_CERT_FILE=
# BUILD_XMPP is not set
# BUILD_ALLJOYN is not set
# BUILD_UPNP_IGD_HTTP_CONNREQ is not set
# BUILD_SNMP is not set
# BUILD_TR64 is not set
# BUILD_UPNP is not set
# BUILD_HASHED_PASSWORDS is not set

#
# Debug selection
#
# BUZZZ is not set
# BRCM_KERNEL_FTRACE is not set
# BRCM_DRIVER_LOG is not set
BRCM_KERNEL_KALLSYMS=y
# BRCM_KERNEL_DEBUG is not set
# BUILD_EPITTCP is not set
ENABLE_PRINTK_AND_BUG=y
BCM_DEFAULT_CONSOLE_LOGLEVEL=
# BCM_PRINTK_TIME is not set
# BCM_COLORIZE_PRINTS is not set
# BCM_ASSERTS is not set
# BCM_KERNEL_HACKING is not set
# BCM_BCM_SCHEDAUDIT is not set
BCM_MAGIC_SYSRQ=y
# BRCM_KERNEL_VMTOOLS is not set
# BRCM_KERNEL_CSTAT is not set
BRCM_IKOS=y
# BRCM_DRIVER_BCMPROF is not set
BUILD_DEBUG_TOOLS=y
# BUILD_GDBSERVER is not set
# ENABLE_APP_COREDUMPS is not set
# CMS_SECURITY_LOG is not set
# CMS_LOG_DEBUG is not set
# WLCSM_DEBUG_TRACE is not set
# CMS_ACTION_LOG is not set
# CMS_MEM_BOUNDARY_CHECK is not set
# CMS_MEM_POISON_ALLOC_FREE is not set
# CMS_MEM_LEAK_TRACING is not set
# CMS_FATAL_ASSERT is not set
# CMS_BYPASS_LOGIN is not set
# BUILD_SOAP is not set
# BUILD_DIAGAPP is not set
# BENCHMARKS_SMP is not set
# BUILD_SYSSTAT is not set
# BUILD_STRESS is not set
# BUILD_POSIX_STRESS is not set
# BUILD_LMBENCH is not set
# BUILD_TCPDUMP is not set
# BUILD_SENDPACKETS is not set
# BUILD_IPERF is not set
# BUILD_PCIUTILS is not set
# BUILD_STRACE is not set
# BUILD_DISABLE_EXEC_STACK is not set
# BUILD_LINUX_PERF is not set
BRCM_MEMORY_RESTRICTION_OFF=y
# BRCM_MEMORY_RESTRICTION_16M is not set
# BRCM_MEMORY_RESTRICTION_32M is not set
# BRCM_MEMORY_RESTRICTION_64M is not set
# BUILD_SPICTL is not set
# BUILD_WEB_SOCKETS_TEST is not set
# BRCM_DRIVER_SYSPERF is not set
# BRCM_DRIVER_MEMCCAP is not set
# BUILD_FPING is not set