mirrors/asuswrt-merlin.ng
1
0
Fork 0
mirror of https://github.com/gnuton/asuswrt-merlin.ng.git synced 2025-05-19 16:02:36 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions
asuswrt-merlin.ng/release/src-rt-5.04axhnd.675x/shared/opensource/boardparms/bcm963xx/boardparms_63178.c
Eric Sauvageau e44faf68ef Merge 388_21224 HND5.04 SDK (from gt-axe16000)
2022-10-16 01:01:12 -04:00

1133 lines
65 KiB
C
Raw Permalink Blame History

#include "bp_defs.h"
#include "boardparms.h"
#include "bcmSpiRes.h"
#ifdef _CFE_
#define MOVED_DT(x...) x
#else
#define MOVED_DT(x...)
#endif
#define BCM963178_PHY_BASE 0x8
#define BP_DDR_63178_DEFAULT BP_DDR_VTT_DIS_NOTERM
static bp_elem_t g_bcm963178sv[] = {
{bp_cpBoardId, .u.cp = "963178SV"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
MOVED_DT({bp_usSerialLedData, .u.us = BP_GPIO_26_AH},)
MOVED_DT({bp_usSerialLedClk, .u.us = BP_GPIO_27_AH},)
MOVED_DT({bp_usSerialLedMask, .u.us = BP_GPIO_28_AH},)
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({ bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({ bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({ bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
{bp_usGpioBitbangI2cSda, .u.us = BP_GPIO_3_AH},
{bp_usGpioBitbangI2cScl, .u.us = BP_GPIO_4_AH},
{bp_usI2sSclk, .u.us = BP_GPIO_6_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_7_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_8_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_9_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_10_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
{bp_usGpioBtWake, .u.us = BP_GPIO_24_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_29_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1},
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_80_AL},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_37_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_38_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_39_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_41_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_43_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_45_AH},
MOVED_DT({bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_28_AH},) /*wlan0 led? */
MOVED_DT({bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_26_AH},)
MOVED_DT({bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_27_AH},)
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_SERIAL_GPIO_29_AH},)
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x3f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId5, .u.ul = 0x18 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_0_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_15_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_2_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_16_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_4_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_17_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_6_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_18_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_8_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_19_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 5},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usGpioLedWanLink, .u.us = BP_SERIAL_GPIO_30_AH},)
MOVED_DT({bp_usGpioLedWanAct, .u.us = BP_SERIAL_GPIO_23_AH},)
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
{bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 6}, /* HS_UART for BT */
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_21_AH},
{bp_usUartSdout, .u.us = BP_GPIO_20_AH},
{bp_usUartCts, .u.us = BP_GPIO_22_AH},
{bp_usUartRts, .u.us = BP_GPIO_12_AH},
{bp_usIntfEnd},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm963178sv_p200[] = {
{bp_cpBoardId, .u.cp = "963178SV_P200"},
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_30_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_29_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_28_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_27_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_26_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_14_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_13_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_12_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_11_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_10_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_9_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_7_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_5_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_3_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_1_AH}, /* color led */
{bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_20_AH}, /* wlan0 led */
{bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_25_AH},
{bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_24_AH},
{bp_usGpioLedSesWireless, .u.us = BP_SERIAL_GPIO_21_AH},
{bp_usIntfId, .u.us = 5},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usGpioLedWanLink, .u.us = BP_SERIAL_GPIO_22_AH},)
MOVED_DT({bp_usGpioLedWanAct, .u.us = BP_SERIAL_GPIO_23_AH},)
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
{bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},
{bp_usIntfEnd},
{bp_elemTemplate, .u.bp_elemp = g_bcm963178sv},
{bp_last}
};
static bp_elem_t g_bcm963178ref1[] = {
{bp_cpBoardId, .u.cp = "963178REF1"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
MOVED_DT({bp_usSerialLedData, .u.us = BP_GPIO_26_AH},)
MOVED_DT({bp_usSerialLedClk, .u.us = BP_GPIO_27_AH},)
MOVED_DT({bp_usSerialLedMask, .u.us = BP_GPIO_28_AH},)
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({ bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({ bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({ bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
/* wlan bluetooth co-existance reserved pins */
{bp_usGpioWlanReserved, .u.us = BP_GPIO_30_AL},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_31_AL},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_32_AL},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_33_AL},
MOVED_DT({bp_usGpioLedWL0Act, .u.us = BP_SERIAL_GPIO_28_AH},) /* wlan0 led */
MOVED_DT({bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_26_AH},)
MOVED_DT({bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_27_AH},)
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_SERIAL_GPIO_29_AH},)
{bp_usGpioBitbangI2cSda, .u.us = BP_GPIO_3_AH},
{bp_usGpioBitbangI2cScl, .u.us = BP_GPIO_4_AH},
{bp_usI2sSclk, .u.us = BP_GPIO_6_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_7_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_8_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_9_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_10_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_80_AL},
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x1f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_0_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_15_AH},)
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_2_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_16_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_4_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_17_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_6_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_18_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_8_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_19_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 5},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usGpioLedWanLink, .u.us = BP_SERIAL_GPIO_30_AH},)
MOVED_DT({bp_usGpioLedWanAct, .u.us = BP_SERIAL_GPIO_23_AH},)
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
{bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 6}, /* HS_UART for BT */
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_21_AH},
{bp_usUartSdout, .u.us = BP_GPIO_20_AH},
{bp_usUartCts, .u.us = BP_GPIO_22_AH},
{bp_usUartRts, .u.us = BP_GPIO_12_AH},
{bp_usIntfEnd},
{bp_usGpioBtWake, .u.us = BP_GPIO_24_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_29_AH},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm963178ref1_epa[] = {
{bp_cpBoardId, .u.cp = "963178REF1_EPA"},
{bp_elemTemplate, .u.bp_elemp = g_bcm963178ref1},
{bp_last}
};
static bp_elem_t g_bcm963178ref1_rgmii[] = {
{bp_cpBoardId, .u.cp = "63178REF1_RGM"},
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x3f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId5, .u.ul = 0x19 | PHY_INTEGRATED_VALID | MAC_IF_RGMII_1P8V | PHY_EXTERNAL},)
{bp_elemTemplate, .u.bp_elemp = g_bcm963178ref1},
{bp_last}
};
static bp_elem_t g_bcm963178ref3[] = {
{bp_cpBoardId, .u.cp = "963178REF3"},
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
{bp_usGpioBitbangI2cSda, .u.us = BP_GPIO_72_AH},
{bp_usGpioBitbangI2cScl, .u.us = BP_GPIO_73_AH},
{bp_usI2sSclk, .u.us = BP_GPIO_67_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_68_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_69_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_70_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_71_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_41_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
MOVED_DT({bp_usGpioVoip1Led, .u.us = BP_GPIO_51_AL},)
MOVED_DT({bp_ulLedChannelId, .u.ul = 27},)
MOVED_DT({bp_usGpioVoip2Led, .u.us = BP_GPIO_52_AL},)
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_GPIO_53_AL},)
MOVED_DT({bp_usGpioLedWL0Act, .u.us = BP_GPIO_54_AL | BP_LED_USE_GPIO},) /* wlan0 led */
MOVED_DT({bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_11_AL},)
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x1f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_55_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_22_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_24_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_7_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_6_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_8_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_5_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_9_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_29_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_56_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_20_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_10_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_3_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_4_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_21_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 5},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usGpioLedWanLink, .u.us = BP_GPIO_25_AL},)
MOVED_DT({bp_ulLedChannelId, .u.ul = 24},)
MOVED_DT({bp_usGpioLedWanAct, .u.us = BP_GPIO_49_AL},)
MOVED_DT({bp_usGpioLedWanErr, .u.us = BP_GPIO_50_AL},)
{bp_ulLedChannelId, .u.ul = 31},
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
{bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm963178ref2_base[] = {
{bp_cpBoardId, .u.cp = "963178REF2BASE"},
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
{bp_usI2sSclk, .u.us = BP_GPIO_67_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_68_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_69_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_70_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_71_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
MOVED_DT({bp_usGpioVoip1Led, .u.us = BP_GPIO_51_AL},)
{bp_ulLedChannelId, .u.ul = 27},
MOVED_DT({bp_usGpioVoip2Led, .u.us = BP_GPIO_52_AL},)
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_GPIO_53_AL},)
{bp_usGpioLedWL0Act, .u.us = BP_GPIO_54_AL | BP_LED_USE_GPIO}, /* wlan0 led */
{bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_11_AL},
{bp_usGpioWireless0Disable, .u.us = BP_GPIO_27_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x1f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_55_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_22_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_24_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_7_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_6_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_8_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_5_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_9_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_29_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_56_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_20_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_10_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_3_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_4_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_21_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 5},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usGpioLedWanLink, .u.us = BP_GPIO_25_AL},)
MOVED_DT({bp_ulLedChannelId, .u.ul = 24},)
MOVED_DT({bp_usGpioLedWanAct, .u.us = BP_GPIO_49_AL},)
MOVED_DT({bp_usGpioLedWanErr, .u.us = BP_GPIO_50_AL},)
MOVED_DT({bp_ulLedChannelId, .u.ul = 31},)
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
{bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm963178ref2[] = {
{bp_cpBoardId, .u.cp = "963178REF2"},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_38_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_41_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
{bp_elemTemplate, .u.bp_elemp = g_bcm963178ref2_base},
{bp_last}
};
static bp_elem_t g_bcm963178ref2_p200[] = {
{bp_cpBoardId, .u.cp = "963178REF2_P200"},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_37_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_41_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_43_AH},
{bp_elemTemplate, .u.bp_elemp = g_bcm963178ref2_base},
{bp_last}
};
static bp_elem_t g_bcm963178ref2_p300[] = {
{bp_cpBoardId, .u.cp = "963178REF2_P300"},
{bp_elemTemplate, .u.bp_elemp = g_bcm963178ref2_p200},
{bp_last}
};
static bp_elem_t g_bcm963178ref6[] = {
{bp_cpBoardId, .u.cp = "963178REF6"},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_37_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_43_AH},
{bp_elemTemplate, .u.bp_elemp = g_bcm963178ref2_base},
{bp_last}
};
static bp_elem_t g_bcm963178ref5[] = {
{bp_cpBoardId, .u.cp = "963178REF5"},
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_37_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_41_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_43_AH},
MOVED_DT({bp_usGpioVoip1Led, .u.us = BP_GPIO_51_AL},)
{bp_ulLedChannelId, .u.ul = 27},
MOVED_DT({bp_usGpioVoip2Led, .u.us = BP_GPIO_52_AL},)
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_GPIO_53_AL},)
MOVED_DT({bp_usGpioLedWL0Act, .u.us = BP_GPIO_54_AL | BP_LED_USE_GPIO},) /* wlan0 led */
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_usGpioWireless0Disable, .u.us = BP_GPIO_11_AL},
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x1f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_55_AL},)
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_22_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_24_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_7_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_6_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_8_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_5_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_9_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_29_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_56_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_20_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_10_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_3_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G|BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_21_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 5},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usGpioLedWanLink, .u.us = BP_GPIO_25_AL},)
MOVED_DT({bp_ulLedChannelId, .u.ul = 24},)
MOVED_DT({bp_usGpioLedWanAct, .u.us = BP_GPIO_49_AL},)
MOVED_DT({bp_usGpioLedWanErr, .u.us = BP_GPIO_50_AL},)
{bp_ulLedChannelId, .u.ul = 31},
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
{bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm963178rfdvt[] = {
{bp_cpBoardId, .u.cp = "963178RFDVT"},
{bp_ulInterfaceEnable, .u.ul = BP_PINMUX_FNTYPE_NAND},
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
{bp_usGpioWlanReserved, .u.us = BP_GPIO_3_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_4_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_19_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_20_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_21_AH},
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_GPIO_29_AL},)
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x03},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_71_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_70_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_72_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_66_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_69_AL},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_60_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_xDSL},
{bp_usPortNum, .u.us = 0},
{bp_usGpioLedWanAct, .u.us = BP_GPIO_8_AL},
{bp_usGpioLedWanLink, .u.us = BP_GPIO_30_AL},
{bp_ulAfeId, .u.ul = BP_AFE_CHIP_CH0 | BP_AFE_LD_6303 | BP_AFE_FE_ANNEXA | BP_AFE_FE_REV_6303_REV_12_3_70},
{bp_usGpioAFELDPwr, .u.us = BP_GPIO_17_AH}, // Line Driver 0 = "Int"
{bp_usGpioAFELDData, .u.us = BP_GPIO_18_AH},
/* {bp_usGpioAFELDClk, .u.us = BP_GPIO_19_AH},*/ //This is conflict with GPIO 19 for WL reserve pin
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm96750ref4[] = {
{bp_cpBoardId, .u.cp = "96750REF4"},
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_21_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_GPIO_59_AL},)
MOVED_DT({bp_usGpioLedBlPowerOn, .u.us = BP_GPIO_57_AL},)
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x1f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_47_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_51_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_50_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_49_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed3, .u.us = BP_GPIO_56_AL},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm96750ref1[] = {
{bp_cpBoardId, .u.cp = "96750REF1"},
MOVED_DT({bp_usSerialLedData, .u.us = BP_GPIO_26_AH},)
MOVED_DT({bp_usSerialLedClk, .u.us = BP_GPIO_27_AH},)
MOVED_DT({bp_usSerialLedMask, .u.us = BP_GPIO_28_AH},)
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({ bp_usGpio_Intr, .u.us = BP_GPIO_0_AL},)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({ bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({ bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({ bp_usGpio_Intr, .u.us = BP_GPIO_1_AL},)
MOVED_DT({ bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
/* wlan bluetooth co-existance reserved pins */
{bp_usGpioWlanReserved, .u.us = BP_GPIO_30_AL},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_31_AL},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_32_AL},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_33_AL},
MOVED_DT({bp_usGpioLedReserved, .u.us = BP_SERIAL_GPIO_28_AH},) /*wlan0 led? */
MOVED_DT({bp_usGpioVoip1Led, .u.us = BP_SERIAL_GPIO_26_AH},)
MOVED_DT({bp_usGpioVoip2Led, .u.us = BP_SERIAL_GPIO_27_AH},)
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_SERIAL_GPIO_29_AH},)
{bp_usGpioBitbangI2cSda, .u.us = BP_GPIO_3_AH},
{bp_usGpioBitbangI2cScl, .u.us = BP_GPIO_4_AH},
{bp_usI2sSclk, .u.us = BP_GPIO_6_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_7_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_8_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_9_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_10_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_80_AL},
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x1f},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId2, .u.ul = (BCM963178_PHY_BASE + 0x02) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId3, .u.ul = (BCM963178_PHY_BASE + 0x03) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId4, .u.ul = (BCM963178_PHY_BASE + 0x04) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_0_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_15_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_2_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_16_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 2},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_4_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_17_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 3},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 3},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_6_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_18_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
MOVED_DT({bp_usNetLed0, .u.us = BP_SERIAL_GPIO_8_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100|BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_usNetLed3, .u.us = BP_SERIAL_GPIO_19_AH},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 6}, /* HS_UART for BT */
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_21_AH},
{bp_usUartSdout, .u.us = BP_GPIO_20_AH},
{bp_usUartCts, .u.us = BP_GPIO_22_AH},
{bp_usUartRts, .u.us = BP_GPIO_12_AH},
{bp_usIntfEnd},
{bp_usGpioBtWake, .u.us = BP_GPIO_24_AH},
{bp_usGpioBtReset, .u.us = BP_GPIO_29_AH},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_1024MB| BP_DDR_DEVICE_WIDTH_8 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t g_bcm96752ref1[] = {
{bp_cpBoardId, .u.cp = "96752REF1"},
MOVED_DT({bp_usButtonIdx, .u.us = 0},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_0|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_4_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_PRINT | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_ulButtonActionParm, .u.ptr = (void*)"Button Press -- Hold for 5s to do restore to default" },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESET | BP_BTN_TRIG_RELEASE | BP_BTN_TRIG_0S },)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_RESTORE_DEFAULTS | BP_BTN_TRIG_HOLD | BP_BTN_TRIG_5S},)
MOVED_DT({bp_usButtonIdx, .u.us = 1},)
MOVED_DT({bp_usButtonExtIntr, .u.us = BP_EXT_INTR_1|BP_EXT_INTR_TYPE_IRQ_SENSE_EDGE|BP_EXT_INTR_TYPE_IRQ_LOW_LEVEL},)
MOVED_DT({bp_usGpio_Intr, .u.us = BP_GPIO_5_AL},)
MOVED_DT({bp_usButtonAction, .u.us = BP_BTN_ACTION_SES | BP_BTN_TRIG_PRESS },)
MOVED_DT({bp_usGphyBaseAddress, .u.us = BCM963178_PHY_BASE},) // use phy addressses on SF2 with base address 0x8
MOVED_DT({bp_ucPhyType0, .u.uc = BP_ENET_EXTERNAL_SWITCH},)
MOVED_DT({bp_usConfigType, .u.us = BP_ENET_CONFIG_MMAP},) // Accessing SF2 as MMapped external switch
MOVED_DT({bp_ulPortMap, .u.ul = 0x03},)
MOVED_DT({bp_ulPhyId0, .u.ul = (BCM963178_PHY_BASE + 0x00) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
MOVED_DT({bp_ulPhyId1, .u.ul = (BCM963178_PHY_BASE + 0x01) | (ADVERTISE_ALL_GMII | PHY_ADV_CFG_VALID)},)
{bp_usIntfId, .u.us = 0},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 0},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_0_AH},)
{bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_22_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_SPEED_1G},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 1},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 1},
MOVED_DT({bp_usNetLed0, .u.us = BP_GPIO_7_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_SPEED_100},)
MOVED_DT({bp_usNetLed1, .u.us = BP_GPIO_6_AH},)
MOVED_DT({bp_ulNetLedLink, .u.ul = BP_NET_LED_SPEED_1G},)
MOVED_DT({bp_ulNetLedActivity, .u.ul = BP_NET_LED_SPEED_1G},)
{bp_usIntfEnd},
{bp_usIntfId, .u.us = 2}, /* HS_UART for BT */
{bp_usIntfType, .u.us = BP_INTF_TYPE_UART},
{bp_usPortNum, .u.us = 1},
{bp_usUartSdin, .u.us = BP_GPIO_21_AH},
{bp_usUartSdout, .u.us = BP_GPIO_20_AH},
{bp_usUartRts, .u.us = BP_GPIO_12_AH},
{bp_usUartCts, .u.us = BP_GPIO_22_AH},
{bp_usIntfEnd},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_37_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_38_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_39_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_41_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_43_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_45_AH},
MOVED_DT({bp_usGpioLedSesWireless, .u.us = BP_GPIO_27_AL},)
{bp_usI2sSclk, .u.us = BP_GPIO_29_AH},
{bp_usI2sLrck, .u.us = BP_GPIO_30_AH},
{bp_usI2sRxSdata, .u.us = BP_GPIO_31_AH},
{bp_usI2sTxSdata, .u.us = BP_GPIO_32_AH},
{bp_usI2sMclk, .u.us = BP_GPIO_33_AH},
{bp_usPcmSdin, .u.us = BP_GPIO_13_AH},
{bp_usPcmSdout, .u.us = BP_GPIO_14_AH},
{bp_usPcmClk, .u.us = BP_GPIO_15_AH},
{bp_usPcmFs, .u.us = BP_GPIO_16_AH},
{bp_usSpiSlaveSelectNum, .u.us = 1}, /* define the SPI select for voice */
{bp_usSpiSlaveSelectGpioNum, .u.us = BP_GPIO_80_AL},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AH},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AH},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t rt_ax82u_v2[] = {
{bp_cpBoardId, .u.cp = "RT_AX82U_V2"},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
#if 0
{bp_usButtonIdx, .u.us = 0},
{bp_usGpio_Intr, .u.us = BP_GPIO_10_AL}, // LED button
{bp_usIntfId, .u.us = 4},
{bp_usIntfType, .u.us = BP_INTF_TYPE_GPHY},
{bp_usPortNum, .u.us = 4},
{bp_usNetLed3, .u.us = BP_GPIO_21_AL}, // WAN
{bp_ulNetLedActivity, .u.ul = BP_NET_LED_ACTIVITY_ALL},
{bp_usIntfEnd},
#endif
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
#if 0
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
#endif
{bp_last}
};
static bp_elem_t tuf_ax5400_v2[] = {
{bp_cpBoardId, .u.cp = "TUF_AX5400_V2"},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_last}
};
static bp_elem_t xd6_v2[] = {
{bp_cpBoardId, .u.cp = "XD6_V2"},
/* wlan fem_ctrl reserved signals*/
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_ulMemoryConfig, .u.ul = BP_DDR_SPEED_800_11_11_11 | BP_DDR_TOTAL_SIZE_512MB| BP_DDR_DEVICE_WIDTH_16 | BP_DDR_TOTAL_WIDTH_16BIT | BP_DDR_63178_DEFAULT},
{bp_last}
};
static bp_elem_t rt_ax5400[] = {
{bp_cpBoardId, .u.cp = "RT_AX5400"},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_34_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_35_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_36_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_40_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_42_AH},
{bp_usGpioWlanReserved, .u.us = BP_GPIO_44_AH},
{bp_usUsbPwrOn1, .u.us = BP_GPIO_86_AL},
{bp_usUsbPwrFlt1, .u.us = BP_GPIO_85_AL},
{bp_usUsbPwrOn0, .u.us = BP_GPIO_84_AL},
{bp_usUsbPwrFlt0, .u.us = BP_GPIO_83_AL},
{bp_last}
};
bp_elem_t * g_BoardParms[] = {g_bcm963178sv, g_bcm963178sv_p200, g_bcm963178ref1, g_bcm963178rfdvt, g_bcm963178ref3, g_bcm96750ref4, g_bcm96752ref1, g_bcm963178ref2, g_bcm963178ref1_epa, g_bcm963178ref2_p200, g_bcm963178ref2_p300, g_bcm96750ref1, g_bcm963178ref5, g_bcm963178ref6, g_bcm963178ref1_rgmii, rt_ax82u_v2, tuf_ax5400_v2, xd6_v2, rt_ax5400, 0};
Reference in a new issue View git blame Copy permalink